Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Autonomics SystemBuilder 3.1 Module
This thread has 11 replies. Displaying all posts.
Post 1 made on Saturday May 19, 2012 at 20:26
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
Anyone able to import the provided archive and get this to build properly within SystemBuilder?
do wino hue?
Post 2 made on Saturday May 19, 2012 at 21:04
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
The version number I have from both the Autonomic site and Crestron is 2.6 Where did you get 3.1?
"Quality isn't expensive, it's Priceless!"
Post 3 made on Saturday May 19, 2012 at 21:52
Tom Luczywo
Founding Member
Joined:
Posts:
November 2001
115
Yes, I have.....but in one circumstance I addd it to a project that was almost already done and the module would not work.  Beginning from scratch got things going.  The UI auto builds for the most part, but needs just little tweaking.
OP | Post 4 made on Sunday May 20, 2012 at 02:16
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
I emailed support and they sent me version 3.1. They state in the Crestron Webinar video that v3.0 for SB would be out in a week or so and that was late last year. Sort of ridiculous that they dont have it up yet. The documention they provided was still for 2.6 and many of the names and things were no longer valid. I was so excited after hearing a lot of good things apbut am feeling very let down and this point. 
do wino hue?
Post 5 made on Sunday May 20, 2012 at 11:36
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
I've had zero issues with 2.6 Took an existing system and added 4 units to control the 4 streams I have. Works awesome. What advantage does 3.1 supposedly have over 2.6?
"Quality isn't expensive, it's Priceless!"
OP | Post 6 made on Sunday May 20, 2012 at 20:34
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
Wtf? I even tried importing a 2.6 SB archive and overwrote all me existing modules. Opened the demo program, when straight to a build and got all the same errors. 

For the record, I'm thinking these errors don't matter. I think are commands that are just not available with the SB module.

Ere are lots of little things missing from the SB module like thumbs up/down for pandora and being able to start a pandora station based off current artist playing. I don't see any reason why these signals wouldn't be included in the SB module. 
do wino hue?
Post 7 made on Tuesday May 22, 2012 at 17:07
Tom Luczywo
Founding Member
Joined:
Posts:
November 2001
115
I believe you'll have to add some of those commands for SB.  I had to do some touch-up for the UI, as it just takes the CEN-ISERVER template and fills in those basic buttons/UI
OP | Post 8 made on Wednesday May 23, 2012 at 02:50
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
Turns out its just a bunch of commands that don't give driven in SB programming. So its a bit messy with 30 or so errors, but they are safe to ignore. 
do wino hue?
Post 9 made on Sunday September 2, 2012 at 15:38
leos98
Long Time Member
Joined:
Posts:
April 2007
75
Hello,
I was wondering if anyone can help with the autonomics module. I have a system in which one of the sources is going to be a Mac mini. I downloaded the module systembuilder module from the autonomics website, add it to the system and then select it as a device for the touchpanels. The problem is that SB does not builds any pages for it. I see that the selected template is the CEN-SERVER but there is only one page and it is blank. Is the anything special I need to do to have SB build pages.

Please help..

Thx
www.leos-net.com
Let me know if you need help!
Post 10 made on Sunday September 2, 2012 at 21:16
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
On September 2, 2012 at 15:38, leos98 said...
Hello,
I was wondering if anyone can help with the autonomics module. I have a system in which one of the sources is going to be a Mac mini. I downloaded the module systembuilder module from the autonomics website, add it to the system and then select it as a device for the touchpanels. The problem is that SB does not builds any pages for it. I see that the selected template is the CEN-SERVER but there is only one page and it is blank. Is the anything special I need to do to have SB build pages.

Please help..

Thx

Under the MMS device properties in the Equipment view, do you have the build TP pages selected? I just added one to my old SB system and it built all the pages just fine.
"Quality isn't expensive, it's Priceless!"
Post 11 made on Monday September 3, 2012 at 07:59
leos98
Long Time Member
Joined:
Posts:
April 2007
75
It is not an MMS is the module for the appletv. The property to build the pages automatically is checked. Any other ideas?

Thanks.
www.leos-net.com
Let me know if you need help!
OP | Post 12 made on Monday September 10, 2012 at 20:19
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
You may have to assign commands manually.
do wino hue?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse