|
|
|
Crestron Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Crestron AES - LCD Display
| |
|
Topic: | Crestron AES - LCD Display This thread has 8 replies. Displaying all posts. |
|
Post 1 made on Wednesday May 9, 2012 at 21:23 |
Hello all,
Just purchased a used Crestron AES off of eBay and am having a problem setting it up and am hoping to find a few answers from someone that has done or witnessed an installation.
First: The LCD screen is not legible and hard to see the writing unless you look at a cretin angle, almost as if the dimming on it is out of whack and is in need of adjustment. I was unable to find such a control.
Second: I do not have any remotes from Crestron and was planing on using my iPad for control. Reading the manual for the iPad App I do not see a way to do this without a dealer program. Is there a simpler way to do this?
Thank you,
|
Specifying Electrical Engineer |
|
Post 2 made on Wednesday May 9, 2012 at 21:34 |
cgav Select Member |
Joined: Posts: | September 2009 1,568 |
|
|
You are in for a world of hurt.
You will get NOWHERE without the programming software. Without the software, you have purchased a paper weight. I couldn't fathom any Crestron dealer giving you the software either. Even if they did, the learning curve is RIDICULOUS.
If you really want this up and running, you're going to have to find a local dealer to program this for you. This could be cheap or expensive depending on how extensive your setup is. As an FYI, the going rate for Crestron programming is upwards of $100 an hour.
I hate to be the bearer of bad news.
|
|
Post 3 made on Thursday May 10, 2012 at 04:28 |
sofa_king_CI Super Member |
Joined: Posts: | June 2009 4,230 |
|
|
Crestron isn't a DIY type system and requires lots of experience and training to be efficient and effective with. The AES is a great and powerf system. You can definitely have it programmed to be controlled via the Crestron app.
Yiu can try and find a local dealers or there are also many CAIP (Creatron authorized independent programmers) that May be able to work with you on your project.
-/ a dealer; we do not own the software and do not have any rights for sharing or distribution it.
|
do wino hue? |
|
OP | Post 4 made on Thursday May 10, 2012 at 10:40 |
Thank you for your input, I was suspecting as much. I am an Electrical Engineer and have specked a number of full blown Lutron systems in my professional life but have not gotten much in to audio.
Last edited by Misha322 on May 10, 2012 13:46.
|
Specifying Electrical Engineer |
|
Post 5 made on Friday May 11, 2012 at 19:14 |
Greg C Super Member |
Joined: Posts: | October 2002 2,585 |
|
|
Lutron is kids play compared to programming Crestron.
|
CEDIA University Designer CAT Team Member CEDIA University Instructor CEDIA Registered Outreach Instructor |
|
OP | Post 6 made on Monday May 14, 2012 at 17:08 |
Can anyone advise me on the LCD issue. The LCD screen is not legible and hard to see the writing unless you look at a cretin angle, almost as if the dimming on it is out of whack and is in need of adjustment. I was unable to find such a control. Is this a control issue or a broken LCD screen?
|
Specifying Electrical Engineer |
|
Post 7 made on Monday May 14, 2012 at 17:43 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On May 14, 2012 at 17:08, Misha322 said...
Can anyone advise me on the LCD issue. The LCD screen is not legible and hard to see the writing unless you look at a cretin angle, almost as if the dimming on it is out of whack and is in need of adjustment. I was unable to find such a control. Is this a control issue or a broken LCD screen? Sounds like a broken LCD issue. Gotta love fleabay!
|
"Quality isn't expensive, it's Priceless!" |
|
Post 8 made on Tuesday May 15, 2012 at 15:15 |
Tom Luczywo Founding Member |
Joined: Posts: | November 2001 115 |
|
|
Have you tried the "BKLT" hard button on the right side of the LCD screen?
|
|
Post 9 made on Tuesday May 15, 2012 at 18:26 |
audioandnetwork Long Time Member |
Joined: Posts: | November 2007 74 |
|
|
That's something you can set up on programming, Adagio is a good product, all in one solution control system, now you need a programmer or dealer to program or make some suggestion on your design system. Although, If you have the Keypads or APAD you can run a basic out of the box functions but haven't play with like that jet...
|
HELP NEEDED |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|