Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Need a hand - Systembuilder module issue
This thread has 8 replies. Displaying all posts.
Post 1 made on Friday April 6, 2012 at 19:24
cgav
Select Member
Joined:
Posts:
September 2009
1,568
Tried compiling and uploading a small job to a CP2E earlier. Job was built in systembuilder (sorry!)

Got the following two critical errors upon building that wouldnt let me continue. Any ideas?

1Critical
Symbol S-13 (Keyboard Text Processor.USH) in module S-1.8.11.3:S-23 (Module file C:\Program Files (x86)\Crestron\Simpl\USRMACRO\Full IBM Keyboard Module.umc) cannot be opened. Check location in User SIMPL+ or program folder, or recompile the associated .USP file.
Unexpected error condition (190). Contact Crestron Customer Support for assistance.

This error condition was unexpected. Please contact Crestron Customer Support and provide them with the error number (190).
2Critical
Symbol S-3 (NX587 Processor.USH) in module S-1.8.16.3 (Module file C:\Program Files (x86)\Crestron\Simpl\USRMACRO\NX587 Module.umc) cannot be opened. Check location in User SIMPL+ or program folder, or recompile the associated .USP file.
Unexpected error condition (190). Contact Crestron Customer Support for assistance.
Post 2 made on Friday April 6, 2012 at 23:09
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
Did you do the latest updates from Crestron and this is an older file? I had very similar issues, with the exact same unexpected error, and TB said sometimes after doing an update Systembuilder thinks it's working with the old database and can screw things up. Open the file, choose archive, then import it back in. You'll have to rename it but who cares. I've started doing this after every Crestron update and 99.9% of my issues have vanished.
"Quality isn't expensive, it's Priceless!"
OP | Post 3 made on Friday April 6, 2012 at 23:26
cgav
Select Member
Joined:
Posts:
September 2009
1,568
Not an older file. New file. The problem reared it's head when I used Dropbox this week to keep the same program on two computers keeping the project updated from either office or laptop. At least that's what I'm going to tell myself.

Searched the yahoo group and found some instances of this happening to others when using Dropbox. Seems too large to be a coincidence.
Post 4 made on Saturday April 7, 2012 at 04:07
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
On 1333769212, cgav said...
Not an older file. New file. The problem reared it's head when I used Dropbox this week to keep the same program on two computers keeping the project updated from either office or laptop. At least that's what I'm going to tell myself.

Searched the yahoo group and found some instances of this happening to others when using Dropbox. Seems too large to be a coincidence.

I had issues with trying to keep an active file on Dropbox. I now export am archive to Dropbox as soon as I'm done or even as I go, but keep the active file on the local hard drive. 
do wino hue?
Post 5 made on Saturday April 7, 2012 at 09:19
lites4u
Active Member
Joined:
Posts:
August 2006
745
On April 7, 2012 at 04:07, sofa_king_CI said...
|

I had issues with trying to keep an active file on Dropbox. I now export am archive to Dropbox as soon as I'm done or even as I go, but keep the active file on the local hard drive. 

+1
Post 6 made on Saturday April 7, 2012 at 09:24
lites4u
Active Member
Joined:
Posts:
August 2006
745
Also check your module file save location in system builder. After an update I had system builder default back to its original file save locations for the modules. I create folders for all my modules and IR devices as well as programs and point system builder to them.
Post 7 made on Saturday April 7, 2012 at 10:59
SWOInstaller
Select Member
Joined:
Posts:
October 2010
1,589
Try opening up the user module and recompiling to file. I have seen these errors before that that has seemed to fix my problems
You can't fix stupid
OP | Post 8 made on Saturday April 7, 2012 at 18:19
cgav
Select Member
Joined:
Posts:
September 2009
1,568
Got the escient one fixed, but the NX 587 module is still giving me fits.
OP | Post 9 made on Saturday April 7, 2012 at 20:13
cgav
Select Member
Joined:
Posts:
September 2009
1,568
Thanks for the assistance. I tried re-compiling them SEVERAL times, always with the same result. I finally figured out that I had 2 copies of the same module in the Simpl directory. It was using the older one that was not SB friendly. Removed those older modules, recompiled the modules for good measure and the new compile worked.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse