Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 2
Topic:
MLX-3 and Systembuilder
This thread has 17 replies. Displaying posts 1 through 15.
Post 1 made on Sunday February 19, 2012 at 10:34
Gman-north
Select Member
Joined:
Posts:
February 2009
2,243
Has anyone heard when the MLX-3 will be supported in Systembuilder? I have to replace an older MLX-2 that crapped out and the programming was done in SB.
Post 2 made on Sunday February 19, 2012 at 11:35
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
Was told last week "in the near future" by TB so hopefully soon.
"Quality isn't expensive, it's Priceless!"
Post 3 made on Sunday February 19, 2012 at 21:42
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
What I don't get is that the PLX3 is already working in SB. I was having some issues with the lighting control part of it, but everythign else was working great.
do wino hue?
Post 4 made on Monday February 20, 2012 at 08:24
lites4u
Active Member
Joined:
Posts:
August 2006
745
Yah, I hear you there. Same goes for the PAMP 4X100. When you add the new C2N-4X100 to a program the rooms don't automatically get connected to an audio zone. You have to do all the programming manually when you use these amps now.
Post 5 made on Sunday March 25, 2012 at 13:16
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
MLX3 now in SystemBuilder!

But maybe not quite ready yet......

Last edited by kgossen on March 25, 2012 13:25.
"Quality isn't expensive, it's Priceless!"
OP | Post 6 made on Sunday March 25, 2012 at 19:20
Gman
Select Member
Joined:
Posts:
February 2009
2,243
Looks like its only available for Adagio..which means they have launched this for AVAD dealers and not full liners.....
Post 7 made on Sunday March 25, 2012 at 20:23
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
On March 25, 2012 at 19:20, Gman said...
Looks like its only available for Adagio..which means they have launched this for AVAD dealers and not full liners.....

Nope. Just programmed mine with an MC3 and no Adagio. Takes a little to get used to but works fine.
"Quality isn't expensive, it's Priceless!"
OP | Post 8 made on Sunday March 25, 2012 at 20:24
Gman
Select Member
Joined:
Posts:
February 2009
2,243
On March 25, 2012 at 20:23, kgossen said...
Nope. Just programmed mine with an MC3 and no Adagio. Takes a little to get used to but works fine.

Yup....just downloaded the software and yes it is in there for the MC3
Post 9 made on Monday March 26, 2012 at 03:05
sofa_king_CI
Super Member
Joined:
Posts:
June 2009
4,230
Sweet! I'm playing with this tomorrow! Or tonight if this insomnia keeps up. 

@gman I don't think Avad has adagio, just prodigy and oncue but I could be wrong.
do wino hue?
OP | Post 10 made on Monday March 26, 2012 at 06:37
Gman
Select Member
Joined:
Posts:
February 2009
2,243
You could be right but I thought they had the Adagio line up at one point. I wish they would get a fully functional wizard for the new C2n amp . It would save alot of time for smaller systems
Post 11 made on Monday March 26, 2012 at 09:48
lites4u
Active Member
Joined:
Posts:
August 2006
745
How is the MLX-3? You guys like it?
Post 12 made on Monday March 26, 2012 at 10:54
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
The remote looks and feels great. Programming is taking a little time to get used to but not too difficult. We'll see how it performs once done!
"Quality isn't expensive, it's Priceless!"
Post 13 made on Monday March 26, 2012 at 12:33
lites4u
Active Member
Joined:
Posts:
August 2006
745
Can you customize the gui? Take stuff out if not needed?
Post 14 made on Monday March 26, 2012 at 13:17
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
On March 26, 2012 at 12:33, lites4u said...
Can you customize the gui? Take stuff out if not needed?

Working on that now. Definitely some bugs right out of the gate. Nice thing is you program it via RF, doesn't get plugged into USB except for firmware upgrades.
"Quality isn't expensive, it's Priceless!"
Post 15 made on Monday March 26, 2012 at 13:21
lites4u
Active Member
Joined:
Posts:
August 2006
745
Sweet. I'll keep checking back. I could use these on a job coming up.
Page 1 of 2


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse