Hello Guys, I downloaded the module but there was no Help File and am looking for the pin out on the db 9, cause the cable we have is a cat5 so needs a field termination, you guys know or have the help file?

Thanks on any feedback!

Straight thru. 2,3,5 7,8

This security Guys put another RS232 module that is not the one that I read on the Manual,this one is a separete box they told me that should work, so I just plug a 232 normal cable for connection. Now I can Only see on the Debbuger the data coming from the alarm but I cannot Send for example ( Off, 1,2,3,4,) to disarm the alarm, I dont know if is due to that am using a ADAGIO AES for 12 audio zones, video switch, (5) IR's , Lutron Radio Ra 2 , and the (4) Relays to control gates. GUys from Crestron told me that there's is a bad communication between a GE SYSTEM and specifically a AES processor that wont communicate properly, any of you guys had this kind of system running kinda the same before? they just told me to put a QM-RMC for only alarm, wish I agree because the amount of data that I see running.

For any control system I suggest using a seperate processor for alarms if you are using 2-way. Some thermostats send out a ton of information too.

I ended up telling to the dealer that I was highly advised to put on a QM-RMC, I did put all the logic of the module and it did pull out on Debugger the status of the GE, and that was a lot of data coming from, but unable to execute a command like ##. am waiting to get that processor to hook it up to the system and tries that!