| Post 1 made on Monday November 28, 2011 at 20:39 |
AVXpressions Senior Member |
Joined:
Posts: | September 2002
1,163 |
|
|
New to Crestron and have a question about a project.
I have an MC3 processor controlling a media room using a MTX-3 remote. In that system is an Integra 30.3 dual zone receiver along with an IDOCV hooked up to the integra with an ABAR-1 audio interface. Works great on the MTX-3 Remote.
Now I also have a TPMC4-SMD touchscreen installed in the kitchen to run the zone 2 from the integra receiver.
The question is how do I make the TPMC4-SMD see the IDOCV and show the ipod info like the MTX-3 does.
I am programming this in SystemBuilder.
Any help would be greatly appreciated.
|
|
| Post 2 made on Monday December 5, 2011 at 21:31 |
Hanna Long Time Member |
Joined:
Posts: | January 2009
83 |
|
|
I know this really isnt any help but you should really learn how to program in Simpl. This is very easy in Simpl.
|
|
| Post 3 made on Wednesday December 7, 2011 at 15:07 |
lites4u Active Member |
Joined:
Posts: | August 2006
745 |
|
|
You have to go to the TPMC4-SMD and look under properties. Make sure under devices that you have the idocv selected. really simple
|
|
| Post 4 made on Thursday December 8, 2011 at 01:33 |
sofa_king_CI Super Member |
Joined:
Posts: | June 2009
4,230 |
|
|
+1 above. Also, you can manual build the file yourself.
|
do wino hue? |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
