|
|
|
Crestron Control Systems Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Crestron module RS232 volume control for...
| |
|
Topic: | Crestron module RS232 volume control for AVR3311 Denon.... This thread has 4 replies. Displaying all posts. |
|
Post 1 made on Monday January 10, 2011 at 16:41 |
scoop city Advanced Member |
|
|
anyone had issues with Crestron RS232 control for AVR3311 Denon? We are using a Crestron module for AVR3310 and volume up and down only step up and down with an individual button press, no volume ramping. Anyone had this issue? any ideas?
|
|
Post 2 made on Monday January 10, 2011 at 16:51 |
ILO Long Time Member |
Joined: Posts: | August 2006 416 |
|
|
If you are using SIMPL you can add an oscillator to generate multiple presses to the module while the volume up/down buttons are held. I have run into this with serial control modules for other AV preamps and receivers.
|
|
|
Post 3 made on Monday January 10, 2011 at 16:55 |
Audible Solutions Super Member |
Joined: Posts: | March 2004 3,246 |
|
|
Put a oscillator ( speed key OSC ) between button press and the volume input arguments ( you will need 2 symbols, one for volume up and a second for volume down). I like to use .3s for each parameter but you can adjust the time the signal is high and low to suit your taste for ramping speed and the requirements of the unit under control. Or teach the client to repeatedly press and release the volume buttons. It is not inherently a flaw in the macro. The macro works. You wish it to work differently, So code the system, including the macro, to work as you desire by adding the oscillator symbol to the code.
Or you can become even more creative and use a press and hold macro, with the press going directly to the volume driver and the held argument going to the oscillator. You'll have to deal with jammed digital signals but an OR gate makes this rather trivial bit of code.
Or hire someone to do all of this for you.
Alan
|
"This is a Christian Country,Charlie,founded on Christian values...when you can't put a nativiy scene in front fire house at Christmas time in Nacogdoches Township, something's gone terribly wrong" |
|
Post 4 made on Monday January 10, 2011 at 16:56 |
Hertz Active Member |
Joined: Posts: | December 2007 657 |
|
|
Use the Module on the Denon CI site for the 3311. No ramping issues with it there.
|
|
OP | Post 5 made on Monday January 10, 2011 at 18:05 |
scoop city Advanced Member |
|
|
Thanks for the heilp. Now we realize that the codes we have work fine on the TPS6 touchpanel and probably did since we loaded program....it is the TPMC3X that has the volume not be able to ranp up and down......go figger......
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|