anyone had issues with Crestron RS232 control for AVR3311 Denon? We are using a Crestron module for AVR3310 and volume up and down only step up and down with an individual button press, no volume ramping. Anyone had this issue? any ideas?

If you are using SIMPL you can add an oscillator to generate multiple presses to the module while the volume up/down buttons are held. I have run into this with serial control modules for other AV preamps and receivers.

Put a oscillator ( speed key OSC ) between button press and the volume input arguments ( you will need 2 symbols, one for volume up and a second for volume down). I like to use .3s for each parameter but you can adjust the time the signal is high and low to suit your taste for ramping speed and the requirements of the unit under control. Or teach the client to repeatedly press and release the volume buttons. It is not inherently a flaw in the macro. The macro works. You wish it to work differently, So code the system, including the macro, to work as you desire by adding the oscillator symbol to the code.

Or you can become even more creative and use a press and hold macro, with the press going directly to the volume driver and the held argument going to the oscillator. You'll have to deal with jammed digital signals but an OR gate makes this rather trivial bit of code.

Or hire someone to do all of this for you.

Alan

Use the Module on the Denon CI site for the 3311. No ramping issues with it there.

Thanks for the heilp. Now we realize that the codes we have work fine on the TPS6 touchpanel and probably did since we loaded program....it is the TPMC3X that has the volume not be able to ranp up and down......go figger......