 |
 |
|
|
Complete Control by URC Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Oddity with MX900 and new Samsung BDP1500
| |
|
| Topic: | Oddity with MX900 and new Samsung BDP1500 This thread has 4 replies. Displaying all posts. |
|
| Post 1 made on Tuesday November 25, 2008 at 21:18 |
bennettavi Active Member |
Joined:
Posts: | August 2003
675 |
|
|
I am at a loss, but i cannot figure why the PAUSE button on the MX900 will not command the Sam BDP1500. All other programmed buttons work - even the macro of raising the lights from the same button works, but not the actual Pausing.
I can use the original remote and it works. I have pulled from preprogrammed data and used the LEARN function for pause. Still no go. I also tried the BDP1400 codeset - same issue.
I programmed pause button to be PLAY - and it works fine. Pause...not so much. I am just baffled. Any thoughts?
|
|
| Post 2 made on Wednesday November 26, 2008 at 00:54 |
Tom Ciaramitaro Loyal Member |
Joined:
Posts: | May 2002
7,967 |
|
|
1400 had play/pause; 1500 has separate play and pause. Use the slow + button for pause or learn it in. The play/pause from the 1400 is play on the 1500.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
| Post 3 made on Wednesday November 26, 2008 at 01:42 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,104 |
|
|
Tom,
I've wondered how these command differences operate.
If you hit PAUSE on the 1500 and then hit it again, will the unit go out of pause into play? That would make it a pause/play button...except that hitting PAUSE from STOP might not put it into play.
If PAUSE will both put the 1500 into pause, then play, that makes it a PAUSE/PLAY toggle, but not a STOP/PLAY toggle. Just curious, that's all.
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
| OP | Post 4 made on Wednesday November 26, 2008 at 14:33 |
bennettavi Active Member |
Joined:
Posts: | August 2003
675 |
|
|
Thanks tom and ernie - i figured it was something weird like that.
thanks again
|
|
| Post 5 made on Thursday November 27, 2008 at 03:38 |
Tom Ciaramitaro Loyal Member |
Joined:
Posts: | May 2002
7,967 |
|
|
Ernie,
The 1400 had the pause/play toggle.
The 1500 has separate commands for each.
The 1400 pause/play command acts as play on the 1500 and that is all it does.
The SLOW + command on the 1400 is the pause on the 1500. Press it again and you get a frame advance. No return to play, else it would be a toggle, right?
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
