| Post 1 made on Friday July 27, 2007 at 15:18 |
mncsolutions Long Time Member |
Joined:
Posts: | March 2007
48 |
|
|
I am trying to create a template and have used various IDs for the buttons but when you use the Database and select Save all none of them save. Can anyone help with this? Once I can figure this out I have a few templates, even multiroom system templates that I would be posting here. Thanks.
|
Matthew Chartier
MNC Solutions |
|
| Post 2 made on Thursday August 2, 2007 at 00:40 |
Ericjb Active Member |
Joined:
Posts: | February 2004
655 |
|
|
You say you are using various IDs, how are you setting these IDs? The way I do it is create the template and drag the commands one by one onto the template from the preprogrammed database and as you place the commands, you will see the IRID box will show an ID. You can then select the device on the left side in tree view, right click and select delete contents to erase all of the commands. Now when you click save all the commands will be automatically saved.
Hope this helps
|
There are 10 types of people in this world,
There are those who understand binary,
and those who don't! |
|
| OP | Post 3 made on Thursday August 2, 2007 at 08:48 |
mncsolutions Long Time Member |
Joined:
Posts: | March 2007
48 |
|
|
I was labeling them as the command was labeled. Thanks I will try that out.
|
Matthew Chartier
MNC Solutions |
|
| OP | Post 4 made on Thursday August 2, 2007 at 11:08 |
mncsolutions Long Time Member |
Joined:
Posts: | March 2007
48 |
|
|
That works thanks for the tip.
|
Matthew Chartier
MNC Solutions |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
