| Post 1 made on Monday July 9, 2007 at 14:11 |
I'm trying to configure my MSC-400 to fire RS232 Commands. I created a RS232 Device in the MSC-400 then created the macro group using the tools button. When I test the commands individually through the USB and they work fine. Next I created the macro group for the device downloaded from the MX-3000 and added the RS232 commands to there respective macros. However when I press the button on the MX-3000 only the IR's work so I assume it's not firing the commands in the Macro for the RS232. What am I doing wrong?
|
Kevin Tate |
|
| Post 2 made on Monday July 9, 2007 at 19:49 |
Fins Elite Member |
Joined:
Posts: | June 2007
11,627 |
|
|
Did you import the macro triggers from the 400 to the 3000? Because from what you have posted it looks like you left that step out
|
Civil War reenactment is LARPing for people with no imagination.
|
|
| OP | Post 3 made on Tuesday July 10, 2007 at 08:53 |
Thanks that was all I needed!
|
Kevin Tate |
|
| Post 4 made on Wednesday July 11, 2007 at 00:10 |
Fins Elite Member |
Joined:
Posts: | June 2007
11,627 |
|
|
Glad I could help. At first the 400 seems like it doubles programing time. But once you figure it out, you'll love it.
|
Civil War reenactment is LARPing for people with no imagination.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
