Post 1 made on Wednesday June 27, 2007 at 17:25 |
dugan Long Time Member |
Joined: Posts: | December 2005 69 |
|
|
any one know what time delay works best with the mx-3000 with pvr622 reciever 1and mrf-250. i've tried a few. jobs along ride. need to finish. i have 4 pages,9 icons per page so i would like to get it done tonight. surf are you out there. also for the off air on dishnetwork the #'s 007-00 how do i key in the dash. thanks in advance...dugan
|
audio/video dave |
|
Post 2 made on Wednesday June 27, 2007 at 18:05 |
Lee Kropp Long Time Member |
|
|
i use a 0.3 second delay between each number. As far as the off air locals enter 0070 with the 0.3 between each number.
Lee
|
|
|
OP | Post 3 made on Wednesday June 27, 2007 at 18:14 |
dugan Long Time Member |
Joined: Posts: | December 2005 69 |
|
|
thanks lee.
|
audio/video dave |
|
Post 4 made on Thursday June 28, 2007 at 19:27 |
ZMass Long Time Member |
Joined: Posts: | September 2006 259 |
|
|
I've never had to put more than .1 delay for dish 622. Without the MRF250, i use no delay at all. But then again if the job is far away, it's better safe than sorry.
Be aware the 622 is very sensitive to IR. Usually end up turning emitter gain all the way down.
|
Zeke Mass North County Home Theater |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.