| Post 1 made on Monday April 30, 2007 at 18:10 |
weatherby Lurking Member |
Joined:
Posts: | January 2005
6 |
|
|
I am using the MX-850 with the MRF-250 and can't seem to get the 250 to operate anything. The remote and the 250 are set to address #2. The infared remote commands work great with all the equipment, but nothing seems to be going through the emitters even though I see the red lights flicker. Do you think it could just be a bad MRF-250 or does someone have a suggestion to check. I have another 250 and MX-850 in another room and they work perfect. Thanks....
|
|
| Post 2 made on Wednesday May 2, 2007 at 14:33 |
Surf Remote Loyal Member |
Joined:
Posts: | July 2001
5,958 |
|
|
|
| OP | Post 3 made on Wednesday May 2, 2007 at 16:24 |
weatherby Lurking Member |
Joined:
Posts: | January 2005
6 |
|
|
Mike thanks. I finaly just decided it had to be a bad unit cause I had tried everything else. I am returning it and ordering a MRF-300 hoping it may be a little more stable. I never could get the 250 to control even one unit once so there must be something wrong. I didn't try swaping it out with the other one cause it's a little difficult to get to it in my system. I am still sold on the MX-850 it's a great remote for my setup even with lots of macros.
Ed
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
