|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Convert .ccf to .mxg This thread has 10 replies. Displaying all posts. |
|
Post 1 made on Wednesday April 25, 2007 at 08:06 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
I did a search on this and could not find the answer. I'm sure this has been discussed many times, so I apologize in advance. How do I convert non-learned (IR Data) ccf files to mxg files? Obviously the universal browser does not work for this task. Thanks in advance.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 2 made on Wednesday April 25, 2007 at 13:26 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,781 |
|
|
You cannot convert Pronto IR Database codes... at least not without a Pronto.
|
|
OP | Post 3 made on Wednesday April 25, 2007 at 15:18 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
On April 25, 2007 at 13:26, Daniel Tonks said...
You cannot convert Pronto IR Database codes... at least not without a Pronto. Thank you Mr. Tonks
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 4 made on Thursday April 26, 2007 at 10:43 |
1ziggi1 Long Time Member |
Joined: Posts: | September 2006 410 |
|
|
Same problem I am having so I am just going to buy a cheap Pronto and then I can learn the commands on my URC remotes.
|
|
Post 5 made on Thursday April 26, 2007 at 12:59 |
Surf Remote Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
What devices are in the Pronto database that aren't in the URC database, or in some other useable format? I'm asking because I haven't run into such a case in a long time. Mike www.SurfRemoteControl.com
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
OP | Post 6 made on Thursday April 26, 2007 at 13:45 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
On April 26, 2007 at 12:59, Surf Remote said...
What devices are in the Pronto database that aren't in the URC database, or in some other useable format? I'm asking because I haven't run into such a case in a long time. HomeDock Pro power discretes
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 7 made on Thursday April 26, 2007 at 14:26 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
On April 26, 2007 at 13:45, Slimfoot said...
HomeDock Pro power discretes Do you mean the signals discussed in the thread at: [Link: remotecentral.com]And posted (in the 900A condensed Pronto Hex format) in the CCF at [Link: remotecentral.com]Those are fairly easy to convert for use with Universal Browser, as discussed in this thread: [Link: remotecentral.com]
|
|
OP | Post 8 made on Thursday April 26, 2007 at 17:14 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
On April 26, 2007 at 14:26, johnsfine said...
And posted (in the 900A condensed Pronto Hex format) in the CCF at [Link: remotecentral.com]This file when opened in the URC universal browser comes up as IR Data instead of learned IR. I am looking for learned IR so I can drag to the remote.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 9 made on Thursday April 26, 2007 at 18:49 |
johnsfine IR Expert |
Joined: Posts: | September 2002 5,159 |
|
|
I understand Universal Browser can't read that format of Pronto Hex. That's why I linked to a thread that discussed using MakeHex to regenerate the codes in the form Universal Browser will understand.
Maybe "Audio Vision" from that other thread has tested it already and you can get files from him. Or maybe you can read a few threads about MakeHex and do the conversion yourself. Or maybe I'll find more time later to give more help.
|
|
OP | Post 10 made on Thursday April 26, 2007 at 19:22 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
Thanks for the help folks. DLO sent me some RCC files which work great.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 11 made on Friday April 27, 2007 at 06:05 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,781 |
|
|
I should also probably point out for future searches, that the Pronto's database does not always contain everything it says it has. It claims to have discrete codes for numerous devices, but in many cases those codes either do nothing or are the standard toggle.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|