| Post 1 made on Monday September 6, 2021 at 12:09 |
MeanGene Long Time Member |
Joined:
Posts: | January 2003
31 |
|
|
Does anyone know if the MX-990 will work with a MRF-200 RF Interface?
|
|
| Post 2 made on Monday September 6, 2021 at 12:55 |
As far as I know, you'd need the MX-990i for RF support.
I could be be corrected on that though.
|
|
| OP | Post 3 made on Monday September 6, 2021 at 20:02 |
MeanGene Long Time Member |
Joined:
Posts: | January 2003
31 |
|
|
I guess my thought was do I have to buy the MRF-350 or can I use the MRF-200 (MX-800). I am thinking that I need the MRF-350 but wanted to take a shot.
|
|
| Post 4 made on Monday September 6, 2021 at 20:09 |
Brad Humphrey Super Member |
Joined:
Posts: | February 2004
2,594 |
|
|
It will work.
The MRF-200 was back in the wide-band days, when URC would listen to everything in the air. And consequently, everything would interfere with it.
Modern URC remotes are narrow band. And although it would be best to pair that with a more modern narrow band receiver (like the MRF-350). The MRF-200 will certainly receive the signal and work.
|
|
| Post 5 made on Tuesday September 7, 2021 at 23:58 |
tomciara Loyal Member |
Joined:
Posts: | May 2002
7,962 |
|
|
I have updated from old MX-850 and MRF-250 combinations, and had to update the base stations because of erratic operation.
If you are a hobbyist, you can certainly try. Professionals would probably want to upgrade for reliability..
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
