Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
MX-980 After Reprograming for new projector, ir works but not rf
This thread has 5 replies. Displaying all posts.
Post 1 made on Thursday August 20, 2020 at 14:32
willymec1
Junior Member
Joined:
Posts:
August 2020
2
MX-980 After Reprograming, adding a projector, ir works on all buttons and options except RF.
Projector is a Epson Home Cinema 5030ub.

The remote works at controlling the Avr, Dvd using MRF-350 and RF 250 sensor.
But not the projector.
The remote will work if i point it at the projector ir. Need it to work using the MRF-350 and RF 250 sensor.

New ir blaster to projector.

Any ideas?
Thank you
Bill

Last edited by willymec1 on August 22, 2020 08:01.
Post 2 made on Thursday August 20, 2020 at 15:28
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
"New IR blaster to Projector", but is it the right IR cable? Try switching cables that you know work with one that isn't. Does the problem follow the cable?
OP | Post 3 made on Thursday August 20, 2020 at 18:00
willymec1
Junior Member
Joined:
Posts:
August 2020
2
I just purchased a used MX-980 (for backup) on ebay and it came with 3 IR cables.
One which I needed for the projector.
I tried switching with known working cables like the dvd cable, no help.
The IR light flashes, that's it though.
Post 4 made on Friday August 21, 2020 at 16:52
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,470
Did you try the IR window on the front and back of the projector? I believe the 3030 is like other Epsons and has both
Post 5 made on Monday October 26, 2020 at 02:53
CarlaAlvarez
Junior Member
Joined:
Posts:
October 2020
1
Thank you so much your site has nice content
https://www.walgreenslistens.mobi/

Last edited by CarlaAlvarez on October 27, 2020 02:03.
Post 6 made on Monday October 26, 2020 at 10:57
KenSmith58
Long Time Member
Joined:
Posts:
June 2011
84
Did you go into the CCP and change it for both ir and rf?


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse