Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Nvidia Shield tv pro codeset
This thread has 4 replies. Displaying all posts.
Post 1 made on Monday July 20, 2020 at 09:56
mitch236
Long Time Member
Joined:
Posts:
December 2006
38
I am trying to get my new Nvidia Shield TV Pro integrated with my URC MX-990 but the codeset in Complete Control doesn't work (I assume it works with older Nvidia's). I'm using a FLIRC into the Nvidia's USB. Has anyone gotten this to work?

Thanks!
Post 2 made on Tuesday July 21, 2020 at 09:48
db999md
Junior Member
Joined:
Posts:
April 2020
9
you need to plug your FLIRC into your computer, load up the software, and that is how you tell the FLIRC which remote codes translate into which button on the shield remote. FLIRC does NOT just add a remote receiver to the sheild, it is smarter than that.

you can use the nvidia shield codesset so you should not need to re-prog your remote.

load the software and it will become apparent what you need to do
OP | Post 3 made on Friday August 21, 2020 at 21:11
mitch236
Long Time Member
Joined:
Posts:
December 2006
38
On July 21, 2020 at 09:48, db999md said...
you need to plug your FLIRC into your computer, load up the software, and that is how you tell the FLIRC which remote codes translate into which button on the shield remote. FLIRC does NOT just add a remote receiver to the sheild, it is smarter than that.

you can use the nvidia shield codesset so you should not need to re-prog your remote.

load the software and it will become apparent what you need to do

Thanks for that explanation. I downloaded FLIRC and programmed the device to NVIDIA Shield Gen 2 and it still doesn't work. Any suggestions?
Post 4 made on Wednesday September 2, 2020 at 21:45
db999md
Junior Member
Joined:
Posts:
April 2020
9
If I recall, the order was :

1. set up the URC remote - you can choose nvidia shield codeset or anything you want
2. load the FLIRC software, choose shield gen 2, and then you need to teach the flirc the codes from the URC remote using the software.

that should get u on the right track
Post 5 made on Tuesday September 8, 2020 at 06:50
Timothys
New Member
Joined:
Posts:
September 2020
1
I have searched the forum and was only able to find a thread using a Harmony remote, which I don't have. I am looking for IR codes for the Shield TV that I can import into my RTI T2C remote https://www.krogerfeedback.ltd/

Last edited by Timothys on September 9, 2020 07:29.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse