Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Using 980 file on a 990
This thread has 3 replies. Displaying all posts.
Post 1 made on Saturday November 30, 2019 at 10:44
TCStuckey3
Long Time Member
Joined:
Posts:
November 2003
11
Hey all,

I just finished a pretty involved program for my old 980. I also bought a 990 to have another remote for the same system. Can I load the 980 program onto the 990? I would hate to have to do that whole program again.

Thanks!
Post 2 made on Saturday November 30, 2019 at 16:35
tomciara
Loyal Member
Joined:
Posts:
May 2002
7,052
I am not the last word in this discussion, but I have read a couple notes from people that say itís a piece of cake to copy over to the 990. I personally have had no success, and just did the 990s from scratch.
"People almost invariably arrive at their beliefs not on the basis of proof but on the basis of what they find attractive." - Blaise Pascal
Post 3 made on Sunday December 1, 2019 at 00:14
Andrew 2
Long Time Member
Joined:
Posts:
November 2007
187
Yes you can. Just add the 990 to your program. When the model properties window pops up choose copy and select your 980. Now the 990 will have all the programming from the 980. One thing to note is that the 990 only has a main button and not a watch and listen like the 980 does. So if you are using both on the 980 when you have the 990 selected in the program right click on the 990 in the model designer window. Then select show second main page. Doing this will allow the main button to toggle between the watch and listen pages. And you donít have to do it but I like to open the image gallery and swap the graphics on the 990 because I like them over the 980 graphics
OP | Post 4 made on Sunday December 1, 2019 at 13:31
TCStuckey3
Long Time Member
Joined:
Posts:
November 2003
11
Iíll give it a try. Thanks!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse