Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
need some help Missing Brands and Models in IP database
This thread has 4 replies. Displaying all posts.
Post 1 made on Saturday February 9, 2019 at 12:11
Tkarns24
Long Time Member
Joined:
Posts:
August 2010
143
So I am trying to move the dial on my latest project and I have run into a bit of an issue. I am running CCP v3.9.0103.1 which is the latest release. In the IR database I have been able to find and select my 2018 LG UK7700 model TV; Now my intent is to move away from IR to IP for 2 reasons. 1) better control and 2 way feedback, 2) Less wires running all over the place.
When I select in the Data section IP -- then the brand(LG)--- then the model I get 11 options all of which are OLED's but not my model. What is the issue with that? Am I following the wrong method?
Post 2 made on Saturday February 9, 2019 at 14:02
JoeFlabitz
Senior Member
Joined:
Posts:
December 2008
1,486
As previously mentioned, the LG IP commands are only 1-way.

You may not there are really only 2 codesets in these 11 models. Did you test any of them?
OP | Post 3 made on Saturday February 9, 2019 at 20:30
Tkarns24
Long Time Member
Joined:
Posts:
August 2010
143
Well that sucks a bit, I was hoping that this could work. Is there any alternative option in the URC lineup other than TC that would provide me with 2 way?

Are you saying the only 2 code sets that exist for the LG IP line and that I should try all 11 models in order to find what would work ?



On February 9, 2019 at 14:02, JoeFlabitz said...
As previously mentioned, the LG IP commands are only 1-way.

You may not there are really only 2 codesets in these 11 models. Did you test any of them?
Post 4 made on Sunday February 10, 2019 at 09:26
JoeFlabitz
Senior Member
Joined:
Posts:
December 2008
1,486
On February 9, 2019 at 20:30, Tkarns24 said...
Well that sucks a bit, I was hoping that this could work. Is there any alternative option in the URC lineup other than TC that would provide me with 2 way?|

MX-HomePro offers 2-way with many prominent manufacturers.

[Link: universalremote.com]


Are you saying the only 2 code sets that exist for the LG IP line and that I should try all 11 models in order to find what would work ?|

If, when you select the LG model in the list, you look at the setup # in the box above the models, you'll see there are really only (2) setup #'s- 1052 & 1164.
The most recent addition would be 1164, so I would try that one first.
Post 5 made on Monday February 11, 2019 at 18:20
BizarroTerl
Long Time Member
Joined:
Posts:
October 2002
469
If you want 2 way I suggest you get the spec from the manufacturer (may be difficult). That will tell you what the response is to various commands. CCP/MX-5000 can capture responses and that allows you to make programming decisions on the returned data. Theoretically it will work. I considered it but decided it wasn't worth the time it would take for the results, at least based on how we use remotes.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse