Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Windows 10 and MX-980 or MX-3000
This thread has 5 replies. Displaying all posts.
Post 1 made on Wednesday March 7, 2018 at 11:52
tun6twista
Junior Member
Joined:
Posts:
March 2018
4
Anyone know how to make either remote work with windows 10. I can manually install the driver from the product folder all day but it doesn't help as they are only for Windows XP or Windows 7. SO far I have had to use my personal laptop at work to keep customers up and going. Ugh
EZ does it!
Post 2 made on Wednesday March 7, 2018 at 14:26
rfeigen
Junior Member
Joined:
Posts:
April 2015
3
Hi

Yes, I got it to work, I am swamped but this is what I recall if it doesn't work let me know

My recollection is run as admin the latest Windows Device Center 6.1
[Link: microsoft.com]

Note: the recent patch for Win 10 require you to change logon for service Windows Mobile 2003 Device to local logon. I checked allow interaction (not sure if that is needed)

When I launch CCP I right click and launch as admin too to make sure I get the latest update.
OP | Post 3 made on Tuesday March 20, 2018 at 11:35
tun6twista
Junior Member
Joined:
Posts:
March 2018
4
Thank you very much kind sir! I don't run into this often but I will try this when I get the chance and report back if it worked for me. Have a great week!

Eric

On March 7, 2018 at 14:26, rfeigen said...
Hi

Yes, I got it to work, I am swamped but this is what I recall if it doesn't work let me know

My recollection is run as admin the latest Windows Device Center 6.1
[Link: microsoft.com]

Note: the recent patch for Win 10 require you to change logon for service Windows Mobile 2003 Device to local logon. I checked allow interaction (not sure if that is needed)

When I launch CCP I right click and launch as admin too to make sure I get the latest update.
EZ does it!
Post 4 made on Tuesday March 20, 2018 at 12:38
DJ Garcia
Founding Member
Joined:
Posts:
August 2001
325
On March 7, 2018 at 14:26, rfeigen said...
Hi

Yes, I got it to work, I am swamped but this is what I recall if it doesn't work let me know

My recollection is run as admin the latest Windows Device Center 6.1
[Link: microsoft.com]

Note: the recent patch for Win 10 require you to change logon for service Windows Mobile 2003 Device to local logon. I checked allow interaction (not sure if that is needed)

When I launch CCP I right click and launch as admin too to make sure I get the latest update.

In the program / shortcut properties you can set it to always run in admin mode without having to right-click.
MX-990
OP | Post 5 made on Thursday April 26, 2018 at 09:07
tun6twista
Junior Member
Joined:
Posts:
March 2018
4
On March 20, 2018 at 12:38, DJ Garcia said...
In the program / shortcut properties you can set it to always run in admin mode without having to right-click.

Thank you. I still have yet to run into a situation where I need to try it but I still thank you!
EZ does it!
Post 6 made on Thursday May 17, 2018 at 13:32
asinsh
Long Time Member
Joined:
Posts:
November 2002
48
Rather than searching for the right version of wmdc and drivers, you can open CCP, click "tools" and click to install wmdc. (If you already have a non-working version of wmdc and its drivers, make sure to uninstall those first.)

Once it is installed, make sure to do what rfeigen said and change logon for service Windows Mobile 2003 Device to local logon. Here's how to do that:

- Right click on the windows start key and click "computer management" (or use the search feature in the windows taskbar to search for computer management), and then click "services and applications", and then "services".

- Scroll down and click "Windows Mobile-2003 based device connectivity".

- Click the "log on" tab, check the "local system" (rather than "this account") choice and then check "allow service to interact with desktop".


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse