Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Help with tv Channel Icon Macros for MX- 980
This thread has 7 replies. Displaying all posts.
Post 1 made on Thursday March 1, 2018 at 00:58
KenSmith58
Long Time Member
Joined:
Posts:
June 2011
34
Finished programming my MX-980 w/CCP but I need step by step instructions on how to program channel numbers to the TV Channel icons. I didn't see anything in the Programming manual about channel icons. I'm not really into macro's but I'd like to use the channel icons. Thanks for any help.
For example: If I want to put in 25.3 I know I have to put in 2>pause>5>pause .pause>3>enter. I'm just not sure how to do it right. I went to the Macro menu clicked on the Record. Channel icon blinks. What do I do Next?

Last edited by KenSmith58 on March 1, 2018 18:06.
Post 2 made on Thursday March 1, 2018 at 20:14
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,610
How did you set up your remote without macros?
OP | Post 3 made on Thursday March 1, 2018 at 20:32
KenSmith58
Long Time Member
Joined:
Posts:
June 2011
34
I put in 24 components.. Used IR database to put commands on the hard buttons and the ones I typed for the screen I used the learn function. I don't really care for macro's because for ex: if I just want to watch tv I don't always want 4 other things turning on. I also use a few triggers for things I do want to turn on.
I have 4 TV's and an OTA antenna with no cable. I want to put in 7 channel numbers so they work with the channel logos.

Last edited by KenSmith58 on March 1, 2018 21:16.
Post 4 made on Thursday March 1, 2018 at 20:54
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,610
On March 1, 2018 at 20:32, KenSmith58 said...
I put in 24 components.. Used IR database to put commands on the hard buttons and the ones I typed for the screen I used the learn function. I don't really care for macro's because for ex: if I just want to watch tv I don't always want 4 other things turning on. I also use a few triggers for things I do want to turn on.
Can I get the info I requested now or is it some big company secret? I have 4 TV's and an OTA antenna with no cable. I want to put in 7 channel numbers so they work with the channel logos. If I can't get them I think I'll live. I thought this was a website where I could find help. After doing some research and searches this place looks like a place where people find more insults then help.

Then fvck off. I asked a simple question and didn't say I wouldn't help, but why would I now?
OP | Post 5 made on Thursday March 1, 2018 at 21:12
KenSmith58
Long Time Member
Joined:
Posts:
June 2011
34
Sent you a PM.
Post 6 made on Thursday March 1, 2018 at 23:14
tomciara
Loyal Member
Joined:
Posts:
May 2002
6,565
hot peppers baybee
"Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing ever happened." - Winston Churchill
OP | Post 7 made on Friday March 2, 2018 at 16:26
KenSmith58
Long Time Member
Joined:
Posts:
June 2011
34
Figured it out. Programmed 4 TV's. Thanks for all the help. NOT!!
Post 8 made on Sunday March 4, 2018 at 11:22
tomciara
Loyal Member
Joined:
Posts:
May 2002
6,565
lol
"Men occasionally stumble over the truth, but most of them pick themselves up and hurry off as if nothing ever happened." - Winston Churchill


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse