| Post 1 made on Tuesday March 13, 2007 at 16:13 |
dpinc Long Time Member |
Joined:
Posts: | August 2004
196 |
|
|
I been working with the MSC and I have been doing some testing to see if thing works! I get the triggers and 1 to 6 IR work, And I have tested an Arcam AV9 with RS232 which was in the database. I can't seem to get an Integra DTR8.4 receiver to work RS232 which is'nt in ther database so I had to write it my self! I have search the forums and found some info but I'm still have trouble. My transfer rate is correct I have the Integra protocol sheet and I have writen for exp: power ON: !1PWR01/r But NO good. I did see a forum that said integra was HEX and iIconverted it but NO GO there! Some help please, what am I missing?
|
Derek Pinciaro |
|
| Post 2 made on Tuesday March 13, 2007 at 19:29 |
slobob Long Time Member |
Joined:
Posts: | February 2004
226 |
|
|
I've never had a problem with Integra via RS232 and the MSC400. The "/r" at the end is not something I've seen before. The rest looks good (from memory anyway). You do need to download to the MSC first (especialy if you've changed Baud rate) before testing. Not for every time, just to get the configuration settings, after that, test away!
|
|
| OP | Post 3 made on Wednesday March 14, 2007 at 17:34 |
dpinc Long Time Member |
Joined:
Posts: | August 2004
196 |
|
|
Just so I have everthing clear what is the tranfer rate for integra.
|
Derek Pinciaro |
|
| Post 4 made on Wednesday March 14, 2007 at 20:02 |
slobob Long Time Member |
Joined:
Posts: | February 2004
226 |
|
|
9600, N,8,1
9600 baud,
No parity
8 bits
1 stop bit
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
