Post 1 made on Tuesday January 10, 2017 at 20:06 |
vid1953 Long Time Member |
Joined: Posts: | June 2005 127 |
|
|
I just purchased a new MRF-250 to work with my two remotes.I also have 2 RF20 remotes.I have the MRF-250 set at 0 so all the remotes would work.Well IR does work but when i try to use the RF only, nothing works.The MRF250 status light will blink at every push of a button. I have tried other ID numbers and letters.
|
|
Post 2 made on Wednesday January 11, 2017 at 11:13 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
First thing it says is NOT to use address 0.
Hire a pro.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 3 made on Wednesday January 11, 2017 at 11:22 |
tomciara Loyal Member |
Joined: Posts: | May 2002 7,958 |
|
|
Settings on the remote set for some other RF channel?
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.