|Post 1 made on Sunday January 1, 2017 at 12:39|
I just replaced a VSX-92TXH with a SC-LX701. Most of the 92's codes work for the 701 but I can't find a code for input "STRM BOX".
Complete Control has a database for the 701 but those codes don't work.
I've also tried the Pronto hex codes from the Pioneer web site and many of these don't work either!
I was able to learn most of what I needed from the 701's remote but STRM BOX is missing from the remote. I think that's the only one I'm missing at this point, but it would be nice to have a complete working set for this receiver.
I have verified the receiver is set to remote ID 1.
I've tried the IR port on the front of the receiver as well as the IR 1/8" input on the back.
I am programming an MX-980 if that makes any difference.
Complete Control is up to date.
|OP | Post 2 made on Sunday January 8, 2017 at 18:43 |
The codes in the URC IR database DO work but there is no code for STRM BOX.
There is also no code for Dolby Surround.
I have done additional testing on the Pronto hex info that Pioneer supplies. The Pronto hex for single codes (e.g., A50A for volume up) work. Most of the codes are dual codes (e.g., A557+AF36 for STRM BOX) and these do NOT work.
Is it possible the Pioneer Pronto hex info is incorrect?
Is it possible Complete Control is not interpreting it correctly?
Does anyone have any insight on this issue? I'm not well versed on generating pronto hex from other code formats.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.