Post 1 made on Monday November 14, 2016 at 21:14 |
ctuinstra Long Time Member |
Joined: Posts: | November 2007 19 |
|
|
One of my MX-3000 remotes now has a Fatal Application Error "Application RC.exe has performed and illegal operation and will be shut down...". I've tried many times to resend the file to it and it has been successful. I've even tried other known good files and still get the error. It shows up shortly after booting up. I've tried the reset button many times which doesn't help.
Any thoughts on what can be done to save it?
|
|
Post 2 made on Tuesday November 15, 2016 at 11:31 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
Could be the file became corrupt. Whip up a smaller interface and upload, see if you still get the same error codes.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 3 made on Tuesday November 15, 2016 at 22:07 |
ctuinstra Long Time Member |
Joined: Posts: | November 2007 19 |
|
|
I just installed CCS in it's original form (version 1.20.154) without any updates on another PC and going to try to take it all the way back. I put the original sample file on it and IT WORKED!
Then moved it over to my normal PC with the newer version of CCS (1.40.012) and put the file back on it and it's still up and running.
Hope this helps others out there! I was about ready to toss this one in the trash.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.