|
|
|
The following page was printed from RemoteCentral.com:
Will this cable work for MX-850?
| |
|
Topic: | Will this cable work for MX-850? This thread has 19 replies. Displaying posts 1 through 15. |
|
Post 1 made on Wednesday September 23, 2015 at 18:35 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
I know I can get the original programming cable and then the serial to usb since I don't have a serial port, but will this usb to 3.5mm cord work? [Link: amazon.com]
|
|
Post 2 made on Wednesday September 23, 2015 at 19:58 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,779 |
|
|
No. That's simply a pin converter for a native USB device that happens to use a 3.5mm jack.
You need a USB-to-serial adapter, and then a serial-to-3.5mm cable with the right pinout.
|
|
OP | Post 3 made on Wednesday September 23, 2015 at 20:10 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
Thanks. I will go ahead and buy those then. Another problem is that I can't findthe MX-850 editor software. I looked all around the files section and don't see the mxeditor only manuals.
|
|
Post 4 made on Wednesday September 23, 2015 at 20:13 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On September 23, 2015 at 20:10, ryansclzo said...
Thanks. I will go ahead and buy those then. Another thing I couldn't find was the MX-850 editor software. I looked all around the files section and didn't see the mxeditor only manuals. Was just on the URC dealer site and the 850 software is there.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 5 made on Wednesday September 23, 2015 at 20:22 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
|
Post 6 made on Wednesday September 23, 2015 at 20:25 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,779 |
|
|
Sadly, they don't offer the download to consumers. (Even for an old remote like this!) However, you can use this: [Link: files.remotecentral.com]That's basically an MX-850 that was OEM'd to another company.
|
|
OP | Post 7 made on Wednesday September 23, 2015 at 20:29 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
Thanks Daniel. I managed to find this website that was made by someone who uploaded OEM software from the early MX remotes. [Link: prillaman.net]Now should I use the RM820 editor or the original 2006 software?
|
|
Post 8 made on Thursday September 24, 2015 at 04:53 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,779 |
|
|
Newer software will have a newer code database.
|
|
Post 9 made on Thursday September 24, 2015 at 10:04 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On September 23, 2015 at 20:25, Daniel Tonks said...
Sadly, they don't offer the download to consumers. (Even for an old remote like this!) I agree. Why not release it so consumers with this obsolete remote can at least program it.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 10 made on Monday September 28, 2015 at 16:50 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
I am now having problems. I got the usb to serial and the correct programming cable but the remote just won't connect to the RM820 Editor. On the MX 850 Editor I can only get it to say "Fail! 1" on the remote where the page number is. I cannot update the software because the mx850 editor doesn't have that option and the RM820Editor says its already up to date. I always make sure its using the correct COM port
Last edited by ryansclzo on September 28, 2015 17:24.
|
|
Post 11 made on Monday September 28, 2015 at 17:22 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
Welcome to the world of URC.
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 12 made on Monday September 28, 2015 at 17:23 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
On September 28, 2015 at 17:22, kgossen said...
Welcome to the world of URC. So do you know if its just that I don't have the updated software? On the RM820 I click live update and it tells me that I have the updated version.
|
|
Post 13 made on Monday September 28, 2015 at 18:58 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
It's an issue all the time. If you look through this forum you'll find all kinds of people having issues with URC remotes and connecting. I've never worked with the 850 so unfortunately, I can't be of much help to you. Hopefully somebody here has and can offer some tips.
|
"Quality isn't expensive, it's Priceless!" |
|
Post 14 made on Tuesday September 29, 2015 at 03:54 |
kdp99 Long Time Member |
Joined: Posts: | April 2004 143 |
|
|
On September 28, 2015 at 16:50, ryansclzo said...
I am now having problems. I got the usb to serial and the correct programming cable but the remote just won't connect to the RM820 Editor. On the MX 850 Editor I can only get it to say "Fail! 1" on the remote where the page number is.
I cannot update the software because the mx850 editor doesn't have that option and the RM820Editor says its already up to date.
I always make sure its using the correct COM port Not all USB to serial adaptors work, see here. [Link: remotecentral.com]
|
|
OP | Post 15 made on Wednesday September 30, 2015 at 20:47 |
ryansclzo Long Time Member |
Joined: Posts: | September 2015 13 |
|
|
On September 29, 2015 at 03:54, kdp99 said...
Not all USB to serial adaptors work, see here. [Link: remotecentral.com]Thanks. I figured that so I ordered a Trendnet serial to usb. I was using a prolific one before. I will update when that arrives on Friday.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|