Post 1 made on Sunday July 12, 2015 at 21:13 |
I have an MX-780 that i have programed for myself. The issue i have is some buttons seem to act like i hit them twice. Happens on imported and forced learn programs. It makes selecting a specific function difficult since it will select then unselect. It also will jump 2-3 channels at a time, or when scrolling through xbox menu it will jump 2-3 selections at once.
I hope i am explaining myself ok.
Hopefully someone understands and can point me in the correct direction. I have tried deleting the programming and then reinstalling.
|
|
Post 2 made on Monday July 13, 2015 at 18:07 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
try reducing repeats to 1
|
"Quality isn't expensive, it's Priceless!" |
|
Post 3 made on Wednesday July 15, 2015 at 10:03 |
Total Control Remotes Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
Another method if all else fails is to re-learn the IR codes off the original remote. Make sure your base unit is not getting any interference and test thoroughly.
|
|
Post 4 made on Saturday July 18, 2015 at 14:25 |
Shallowearth Long Time Member |
|
|
I have found the MX-780 to be tricky to control the repeats, even a light tap can be considered a press and hold.
Try this to more discretely control the repeats:
If you click on a button in ccp, it's command appears in the macro box. Double click on the command in the macro box, uncheck repeat while pressed you can then turn down the repeats.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.