Post 1 made on Sunday March 4, 2007 at 11:47 |
VictorE Lurking Member |
Joined: Posts: | January 2007 9 |
|
|
All my commands that I want are programmed and when I test the discreet functions through the IR Data dialog box, everything works fine. When I try to test the same features from the Macro Programming Window (F3), nothing works. The macro runs, but none of the functions other than delays seem to execute.
Same thing when I download to the remote . . . .
What am I missing?
|
|
Post 2 made on Sunday March 4, 2007 at 16:28 |
Malcolm013 Long Time Member |
Joined: Posts: | November 2004 461 |
|
|
Are you controlling the equip via IR or RF? If RF, have you set it up properly? What model remote are you using? RF receiver?
|
"Was it for this my life I sought? Maybe so, Maybe not...
|
|
OP | Post 3 made on Sunday March 4, 2007 at 18:50 |
VictorE Lurking Member |
Joined: Posts: | January 2007 9 |
|
|
I'm controlling everything via IR. I'm programming an MX-3000. There is no RF receiver.
|
|
Post 4 made on Sunday March 4, 2007 at 19:00 |
briremo Senior Member |
Joined: Posts: | December 2005 1,374 |
|
|
you have to load the remote after setting up all the devices codes. I know it'll work while testing individually, but the macros won't work unitl all the IR codes are pushed into the remote
|
feed a dog and he will not bite you. this is the principal difference between a man and a dog. Mark Twain |
|
OP | Post 5 made on Monday March 5, 2007 at 08:33 |
VictorE Lurking Member |
Joined: Posts: | January 2007 9 |
|
|
I've downloaded everything to the remote throught he download command. All the graphics and menus are in the MX-3000.
|
|
Post 6 made on Monday March 5, 2007 at 18:06 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
You're missing something easy unless you just are pointing the remote to all the gear during the entire macro sequence. Send me your file. Email addy in profile.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.