Working with mx-980 and MRF-350 and I cannot get a command to work. I can test code and it works fine. I can add it to any page and button and it tests fine. But when I add it to a page I copied it will not work. The weird thing is all the other macros in the string work but this one doesn't .Is it because I copied page? I would think not because the other commands work in the string. Any ideas? Thanks for your help and time. James

I suspect you did not alias the commands properly. Try changing the remote to IR only and test to see if it works. If it does then the aliases are not correct to coincide with your port assignments

emitter was not seated fully in 350 for one and set at RF only for problem pages. Was in view of component IR when testing so it had me stumped when worked on other pages. Problem solved thanks for your help and time !!! James

That's actually a common problem. Your description threw me off a little I guess. I've encountered the emitter not being seated all the way countless times.

+1 So many wasted hours!!