Post 1 made on Tuesday February 10, 2015 at 00:11 |
tinsnow Long Time Member |
Joined: Posts: | February 2013 131 |
|
|
Hi,
can i use RFX-150 for the msc-400? I see the manual that rfx-250 needs to be used and I was wondering both are rf receivers and if they can be used.
this is for mx-890 remote. got a msc-400 on ebay which did not come with a rf receiver and i believe i need to buy one.
|
|
OP | Post 2 made on Tuesday February 10, 2015 at 15:18 |
tinsnow Long Time Member |
Joined: Posts: | February 2013 131 |
|
|
Looks like i found an answer in other thread. But cannot confirm unless i buy and test it.
Someone had a MRF-300 with RFX-150 and he upgraded to RFX-250. So technically that means they both are compatible with MRF-300.
In the same way the MSC-400 is also a basestation which receives an "RF IN" so my assumption is they are both compatible.
|
|
Post 3 made on Tuesday February 10, 2015 at 18:37 |
thxext Long Time Member |
Joined: Posts: | December 2005 50 |
|
|
I have tested it and it works. I had an extra MRF-300 that I gave to a friend. Like a dummy, I did not have the RFX-150 plugged in all the way and so I tried the RFX-250 and it worked.
I only used the 150 on my MSC-400 for a moment so I can't speak to how well it is going to work.
|
|
Post 4 made on Tuesday February 10, 2015 at 23:31 |
Lowhz Senior Member |
Joined: Posts: | April 2012 1,168 |
|
|
RFX-150 is the wideband RF antenna, RFX-250 is the newer narrowband antenna for remotes built after 2007-ish.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.