|
|
|
Complete Control by URC Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | REPLACING A TV This thread has 4 replies. Displaying all posts. |
|
Post 1 made on Monday February 2, 2015 at 21:39 |
rich_timan Lurking Member |
Joined: Posts: | December 2009 7 |
|
|
On a MX-900, what is the simple way of replacing an old TV with a new one? Surely I don't have to reprogram everything? Thx
|
|
Post 2 made on Monday February 2, 2015 at 22:29 |
goldenzrule Loyal Member |
Joined: Posts: | July 2007 8,470 |
|
|
If its a different brand, you will have to reprogram all your macros that include the TV ON, TV OFF and Input as well as change your punch through for volume assuming you are not using an AVR. If you are using the TV for anything else, then you will have to change programming most likely for those activities as well. If is the same brand, you MIGHT be ok as is, but no way to tell really until you set it up and try it.
|
|
Post 3 made on Tuesday February 3, 2015 at 22:45 |
BobL Founding Member |
Joined: Posts: | March 2002 1,351 |
|
|
If using CCP you can use the IR database navigator and manually replace the commands so you don't have to redo the macros.
|
|
Post 4 made on Wednesday February 4, 2015 at 08:39 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,295 |
|
|
it really depends on if the macros were made by aliasing the codes in the actual TV device. if he just dragged raw codes into the macros, then he will have to redo each one of them.
otherwise what Bob said is true, just leave each button in the TV device and drag the new code onto it, then delete the old code.
it would be nice if URC had an automatic code swap feature like Nevo did and I believe RTI does.
|
|
|
OP | Post 5 made on Friday March 6, 2015 at 17:05 |
rich_timan Lurking Member |
Joined: Posts: | December 2009 7 |
|
|
Thanks folks.... coded it myself a few years ago, but forgot it all. Replacing IR codes should do it.
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|