| Post 1 made on Friday March 2, 2007 at 19:07 |
aero993 Long Time Member |
Joined:
Posts: | December 2002
44 |
|
|
I have looked through the files section. I see plenty of complete system files for other URC remotes but non for the TX-1000. Am I not looking in the right place or have non been posted?
Anthony
|
|
| Post 2 made on Friday March 2, 2007 at 20:28 |
Control Remotes Super Member |
Joined:
Posts: | August 2003
3,434 |
|
|
Anthony, If you are looking for remote codes, the Universal Broswer should be able to import learned commands from any other URC model, as well as Pronto Pro CCF files. Thank you, Damon DG = = = = = http://www.ProRemotes.com - Authorized Dealer & Remote Programming Services
|
Remote Programming Services for URC Remotes http://www.PremierAVDesigns.com - 914-509-5360 Follow me on Twitter @HomeTheaterNY |
|
| OP | Post 3 made on Sunday March 4, 2007 at 10:19 |
aero993 Long Time Member |
Joined:
Posts: | December 2002
44 |
|
|
Actually, I was looking for some designs or templates. I have searched for codes for two devices. The first for a Polaroid FLM-4234BH and a Memorex MVDR2102. Worst case, I'll just learn the codes.
Thanks
Anthony
|
|
| Post 4 made on Monday March 5, 2007 at 18:20 |
tweeterguy Loyal Member |
Joined:
Posts: | June 2005
7,713 |
|
|
You could try devices with similar model #'s from the IR database; many times these work just fine. Otherwise you can manually learn them as you mentioned and then be a good guy and upload them to this site so other people can benefit.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
