This is really strange and I can't seem to fix it. The TV has always been in the basement connected to a X1 satellite box. I use the "input > delay > #" for my input macros. NEVER had a problem. Moved the TV upstairs, adjusted the remote for where it is now. Now, when I hit the input macro button input comes up, then the number is sent to the X1 box. I don't even know how this is possible. I rebuilt the macros and MADE SURE the numbers are from the TV device. Nothing is different. Both boxes are the same. I've tried getting a channel number to appear from the X1 box using the 850 and the original TV remote. Nada, as I suspected.

Remote: MX-850
TV: Panasonic TC-P58V10

Any ideas guys? I've had to add "up/down/select" from the TV to the X1 page just to get it to change.

Thank you!
Jerry

What codeset are you using? You should not have a problem using discreet commands with that set to my knowledge.

Why not bypass the anchor macro you are running for input and use the discretes instead? Then whatever is causing this issue will go away, as you are not using number commands out of the 850.

I'd start here:

[Link: awe-europe.com]

then here:

[Link: files.remotecentral.com]