Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Can't get Sony BDP-S3100 programmed
This thread has 2 replies. Displaying all posts.
Post 1 made on Sunday February 2, 2014 at 20:18
mitch236
Long Time Member
Joined:
Posts:
December 2006
38
I have been using the URC MX-950 with a MSC-400 for many years. Today I replaced my BR player but cannot get the URC to control it no matter what I've tried. I used the IR database for remote RMT-B119A (the remote that came with the unit). The IR blaster is flashing but the player doesn't respond. The stock remote works fine. Does anyone have any experience with this unit? I've tried learning the codes from the stock remote but they don't work either.

Help me please?
Post 2 made on Sunday February 2, 2014 at 21:13
Lowhz
Senior Member
Joined:
Posts:
April 2012
1,168
When you test the commands from "Connected Devices" do they work?

Check that device is set to RF control.
OP | Post 3 made on Monday February 3, 2014 at 08:33
mitch236
Long Time Member
Joined:
Posts:
December 2006
38
Testing the command doesn't work either. I can see the blaster flashing but the DVD player doesn't respond.

Which device are you referring to when you state, "Check that device is set to RF control"? The URC remote is set to communicate with the MSC by RF.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse