Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
I have IR codes for the new hdmi 6X2 Matrix switch
This thread has 12 replies. Displaying all posts.
Post 1 made on Thursday January 16, 2014 at 17:11
audvid
Founding Member
Joined:
Posts:
August 2001
69
There is a new hdmi 6X2 matrix switch on the market.
Here is one version of it

[Link: hdtvsupply.com]

Amazon also has a couple.. you can search for 6x2 matrix hdmi

This switch is being sold by others, under different names. It is available on Amazon also.

Anyway, one of the biggest pains of this switch is - its IR code is URC unfriendly.
It took me 1+hours to accurately program the 16 IR codes from its remote (first, you have to go buy a new battery - the battery supplied, even if new, is junk)

So.. if any of you want a CCP file, let me know. I can send it to you. I could not find a place to upload it here. It is not perfect. I didn't record three buttons - PIP, Enter and one more.
Post 2 made on Friday January 17, 2014 at 15:29
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
Another piece of Chinese crap! Yeah
"Quality isn't expensive, it's Priceless!"
OP | Post 3 made on Friday January 17, 2014 at 17:12
audvid
Founding Member
Joined:
Posts:
August 2001
69
Yes.. I do agree about junk from China.. but it has become a necessary evil! I too wish that we could buy more of made in USA.. It was an effort to buy screw drivers, made in USA - Finally, I found and bought the sears professional line - made in usa - for a price about 4 to 5 times more than chinese..
You can pay $500 for the DVDO version - which is probably better..
Or you can pay $150 for this and it WORKS!
If DVDO was $200, I would have gladly bought the DVDO (which quite possible is also made in China! lol)
Post 4 made on Saturday March 1, 2014 at 08:51
jmlred
Junior Member
Joined:
Posts:
March 2014
1
@audvid -

I would really appreciate a copy of your CCP file. I also left you a PM to that effect. Thanks.

Jim L.
1 March 2014
Post 5 made on Saturday March 1, 2014 at 18:06
SysIntegration
Advanced Member
Joined:
Posts:
December 2013
895
It would be great if those could be shown in hex so that they could be available for everyone. Could you post the learn file you have?
0101001101111001011100110100100101101110011101000110010101100111011100100110000101110100011010010110111101101110
Post 6 made on Wednesday October 28, 2015 at 00:19
dafinestz
Junior Member
Joined:
Posts:
October 2015
1
Would it be possible to send these codes? I'm currently using this Matrix Switcher and have not been able to control it.
OP | Post 7 made on Wednesday October 28, 2015 at 12:16
audvid
Founding Member
Joined:
Posts:
August 2001
69
My apologies to jmlred and sysintegration: I did not noticed the posts from 2014.
I guess I was not automatically subscribed to this thread, when I started this thread.
I have benefited immensely from this forum and would be happy to help.
Just recently, I was copy and use the hex codes for the color buttons of the hopper.
Until now, I didn't figure out how to incorporate hex codes into ccp programmiing.
I have been using the ccp programming software for several years but it is still a "learning in process".

I will be happy to send the ccp file.
I uploaded a couple of ccp files.. forgot which ones I did.
I will be sending it today or shortly thereafter to dafinestz.
I don't have the hex codes - because they are learnt codes from the remote supplied by the 6X2 switch.
Post 8 made on Friday April 14, 2017 at 14:28
Chrisc2
Junior Member
Joined:
Posts:
April 2017
1
Does anyone have the codes for this?
I have a agates 6x2 matrix, identical to the kanaan ones.
OP | Post 9 made on Saturday April 15, 2017 at 21:42
audvid
Founding Member
Joined:
Posts:
August 2001
69
i have a 6X2 matrix ccp.. not sure if it is the same model.
if you wish, i can send the ccp to you.. please send me via PM, your email address
Post 10 made on Wednesday July 12, 2017 at 20:54
loscabosav
Lurking Member
Joined:
Posts:
November 2011
4
That would be great if you can provide. Having issues with a couple of them.
OP | Post 11 made on Thursday July 13, 2017 at 22:25
audvid
Founding Member
Joined:
Posts:
August 2001
69
On March 1, 2014 at 18:06, SysIntegration said...
It would be great if those could be shown in hex so that they could be available for everyone. Could you post the learn file you have?

I will send it to you next week. Please send me pm with your email
Post 12 made on Friday September 1, 2017 at 13:39
RickyTerzis
New Member
Joined:
Posts:
September 2017
1
Hi, im looking at getting this device, its currently on eBay via a number of seller from approx 70.
So this device will only support 5 proper devices the 6th input is just for mobile devices?
Also whats the handshake time like, i have a old 4x2 switcher and the handshake for the time it takes a picture to be display upon switching between inputs is a good 5-8 seconds, is this any better?
OP | Post 13 made on Saturday September 2, 2017 at 07:42
audvid
Founding Member
Joined:
Posts:
August 2001
69
Handshake time is quite fast.. maybe 1 or 2 secs.. not noticeable.
I am not sure about the 6th input.. I thought it also can be used, for non mobile devices also but I am not 100% sure.
I no longer use this switch.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse