Post 1 made on Tuesday November 19, 2013 at 18:41 |
Hart2Hart Long Time Member |
Joined: Posts: | December 2005 485 |
|
|
I added a MRX-1 to my configuration to enable iPad control. All things IR are straight forward. On the Serial front I have two Russound CAV6.6 systems which translates to 6 sources and 12 zones -- it requires control via RS232. Problem is the CCP Serial database only has zones 1-6. How should I approach controlling zones 7-12 on second CAV system?
|
|
Post 2 made on Wednesday November 20, 2013 at 09:01 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,298 |
|
|
add in another serial device that contains the codes for zones 1-6, then edit the serial strings to control zones 7-12.
|
|
|
OP | Post 3 made on Wednesday November 20, 2013 at 21:00 |
Hart2Hart Long Time Member |
Joined: Posts: | December 2005 485 |
|
|
Like the commercial says "Sometimes you feel like a nut"... After reading your suggestion I of course looked and found the serial strings are displayed and can be easily edited. Thanks Duct Tape. Have no clue why I though they could not be edited.
|
|
Post 4 made on Saturday June 14, 2014 at 10:58 |
taecsupertech Long Time Member |
Joined: Posts: | January 2008 19 |
|
|
Good day, I am working with a similiar issue - two CAM6.6 units with ios app. Can you confirm the cable connection? I have used a cable from URC [mx850 cable] and then tried a cable from RTI. neither seems to make connection to the CAM system. Russound stated that it may be a "pinout mismatch"? What is the cable that works? Send me options and I think if I can get connectivity I will be able to follow other posts to get the commands to work.
Thanks
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.