Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 1 of 4
Topic:
Stand Alone MX900 editor.
This thread has 54 replies. Displaying posts 1 through 15.
Post 1 made on Wednesday October 30, 2013 at 21:17
Xm2Go
Long Time Member
Joined:
Posts:
June 2007
54
I am looking for the standalone mx900 exe file. I keep running into very old remotes. CCP doesn't always import everything properly, particularly when importing the RF base station.

URC tech support is not very forward about linking the file, even though you can steadily update it from remote update. Can anyone email or dropbox the mx900 intall exe? It would help so much with this one remote I can't get to properly upload and the original .mxg is lost.
Post 2 made on Thursday October 31, 2013 at 12:30
Lowhz
Senior Member
Joined:
Posts:
April 2012
1,168
Here you go [Link: universalremote.com]
OP | Post 3 made on Thursday October 31, 2013 at 19:59
Xm2Go
Long Time Member
Joined:
Posts:
June 2007
54
Thanks for the EULA. What good does it do me?

It's not like I don't have access to the URC dealer portal. Come on. I've been on this site for the better part of a decade.
Post 4 made on Thursday October 31, 2013 at 20:13
edmund
Elite Member
Joined:
Posts:
April 2002
13,640
If you had access to the dealer portal, you would have access to all software there in, and you wouldn't need to ask here.
Post 5 made on Thursday October 31, 2013 at 20:49
kgossen
Super Member
Joined:
Posts:
March 2008
3,018
On October 31, 2013 at 20:13, edmund said...
If you had access to the dealer portal, you would have access to all software there in, and you wouldn't need to ask here.

MX900 stand alone editor not on the site.
"Quality isn't expensive, it's Priceless!"
OP | Post 6 made on Thursday October 31, 2013 at 21:58
Xm2Go
Long Time Member
Joined:
Posts:
June 2007
54
which is why I am on here asking for it. I've been working with URC (and others) for a very long time. Did you bother to look up my post history first or did you just have to get your post numbers up?

if YOU had access to the URC dealer portal, YOU would know that the stand alone mx900 editor was wiped when they updated their forums a couple months back. Come on, brother. I thought we were all one team here.
Post 7 made on Thursday October 31, 2013 at 23:10
Lowhz
Senior Member
Joined:
Posts:
April 2012
1,168
If you bothered to read the EULA I posted then you would understand that we can't give it to you.

[Link: thepiratebay.sx]

Piracy by any other name is still piracy. You might consider me on your team, but you're not on mine.
OP | Post 8 made on Friday November 1, 2013 at 08:21
Xm2Go
Long Time Member
Joined:
Posts:
June 2007
54
Piracy? Are you kidding me? It's a FREE file. Just about every other FREE programming software is available on this site. Should I go to each of the manufactures websites and fully read the EULA (with my lawyer present) before downloading the file from RC? I'm asking for a file that up until 5 months ago was freely distributed on the internet.

It's not like I am the only person asking for this file. It is all over the AV forums.

Personally I'd like to know what company you work for so that I can avoid it. Custom integrators are supposed to stick together. That's the point of this site.

I'll continue my search elsewhere. Thank you.

Please close this post mods.
Post 9 made on Friday November 1, 2013 at 12:53
Lowhz
Senior Member
Joined:
Posts:
April 2012
1,168
On November 1, 2013 at 08:21, Xm2Go said...
Piracy? Are you kidding me? It's a FREE file. Just about every other FREE programming software is available on this site. Should I go to each of the manufactures websites and fully read the EULA (with my lawyer present) before downloading the file from RC? I'm asking for a file that up until 5 months ago was freely distributed on the internet.

It's not like I am the only person asking for this file. It is all over the AV forums.

Personally I'd like to know what company you work for so that I can avoid it. Custom integrators are supposed to stick together. That's the point of this site.

I'll continue my search elsewhere. Thank you.

Please close this post mods.

Because it's free doesn't mean anything. This site does not host URC editor software. If they did a simple DMCA takedown notice would be complied with and it would be gone.

3. LICENSE RESTRICTIONS
3.1 This EUA does not transfer to End User or any other person or entity any right, title or interest in and to the URC Software or URC Documentation, except as to the limited license right of End User to use such as expressly provided for by this EUA.

3.2 End User shall not use the URC Software or URC Documentation, except expressly designated under this EUA.

3.3 End User shall not copy, reproduce or transmit the URC Software or URC Documentation in any form

3.4 End User may not, directly or indirectly: (a) sell, rent, lease, sublicense, lend, allow access to or otherwise make available, the URC Software or URC Documentation to any entity or person; (b) make modifications to, or generate any derivative work or computer program from, the URC Software or the URC Documentation, (c) distribute, charge or receive any fee for access or use of the URC Software or URC Documentation; or (d) copy, reverse engineer, reverse compile, disassemble, decompile or otherwise manipulate/convert, develop a modified or derivative of the URC Software or URC Documentation or attempt to derive information from such.

3.5 Use of the URC Software and URC Documentation by End User is limited to the initially installed URC Equipment and URC reserves the right to limit the use of the URC Software by device.
Post 10 made on Friday November 1, 2013 at 13:09
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,019
is this guy saying that he is an end user that has access to the URCControlroom?  that's just swell...
[Link: facebook.com]
OP | Post 11 made on Friday November 1, 2013 at 20:20
Xm2Go
Long Time Member
Joined:
Posts:
June 2007
54
On November 1, 2013 at 12:53, Lowhz said...
This site does not host URC editor software.

Thank you.
Post 12 made on Sunday December 8, 2013 at 02:31
tomn1254
Lurking Member
Joined:
Posts:
August 2012
5
I just noticed your thread-I have the standalone editor -got it from URC originally and have used it for a couple of years. D you still need it?
Post 13 made on Monday December 9, 2013 at 13:17
Control Remotes
Super Member
Joined:
Posts:
August 2003
3,429
When in doubt, call URC and ask them to send you the program. I also noticed it wasn't up on the site either, but they still sell them, so why not? Seems odd, since there are so many of them out there.



Damon
Remote Programming Services for URC Remotes
http://www.PremierAVDesigns.com - 914-509-5360
Follow me on Twitter @HomeTheaterNY
Post 14 made on Monday December 9, 2013 at 17:32
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,019
On December 9, 2013 at 13:17, Control Remotes said...
When in doubt, call URC and ask them to send you the program. I also noticed it wasn't up on the site either, but they still sell them, so why not? Seems odd, since there are so many of them out there.

Damon

they want people to use CCP.   the only reason that you would need the mx900 editor, is if you have an older mx900 that won't connect to CCP.
[Link: facebook.com]
Post 15 made on Tuesday December 10, 2013 at 10:08
gwstudios
Senior Member
Joined:
Posts:
June 2004
1,289
I made it a point to download all of the stand alone editors when I heard they were phasing them out for CCP. You never know when you may need them. Plus you can't open files saved in the stand alones in CCP.

I can't tell you how many 850's I programmed back in the day with my trusty serial port notebook. I miss the good old days of setting baud rates....
Find in this thread:
Page 1 of 4


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse