Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Previous page Next page Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Page 7 of 8
Topic:
URC CCP Download
This thread has 116 replies. Displaying posts 91 through 105.
Post 91 made on Friday August 30, 2013 at 20:19
Control Remotes
Super Member
Joined:
Posts:
August 2003
3,429
NOTE TO ALL: by refusing to participate in this conversation, the thread sinks and we all move on. This is a futile effort. There is no reasoning with someone who doesn't understand the full scope of what they are saying or doing.



Damon
Remote Programming Services for URC Remotes
http://www.PremierAVDesigns.com - 914-509-5360
Follow me on Twitter @HomeTheaterNY
Post 92 made on Saturday August 31, 2013 at 17:21
JOE.GRIMS
Junior Member
Joined:
Posts:
August 2013
22
On August 30, 2013 at 20:19, Control Remotes said...
NOTE TO ALL: by refusing to participate in this conversation, the thread sinks and we all move on. This is a futile effort. There is no reasoning with someone who doesn't understand the full scope of what they are saying or doing.

Damon

+1
Post 93 made on Thursday September 5, 2013 at 03:21
tim316
Lurking Member
Joined:
Posts:
May 2012
2
+2
Post 94 made on Sunday December 7, 2014 at 07:47
danel32
Junior Member
Joined:
Posts:
December 2014
2
On October 23, 2012 at 19:03, AVGregg said...
Does anyone know where I can steal some gasoline, I just bought a new car and I'll be damned if I am going to pay the guy at the gas station every time the tank is empty. I really dont care if the gas station owner is trying to make an honest living.

That situation is complete different. It's like you MUST pay for fueling. You will pay for gasoline plus you must pay for gas pump procedure, because gas pump and car's tanking system made so complex that nobody else can do this. No owner, no other gasoline seller...
Post 95 made on Sunday December 7, 2014 at 17:47
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
On December 7, 2014 at 07:47, danel32 said...
That situation is complete different. It's like you MUST pay for fueling. You will pay for gasoline plus you must pay for gas pump procedure, because gas pump and car's tanking system made so complex that nobody else can do this. No owner, no other gasoline seller...

I'm sure he's been waiting 2 years just for your response!
"Quality isn't expensive, it's Priceless!"
Post 96 made on Tuesday April 28, 2015 at 18:57
azag
Junior Member
Joined:
Posts:
June 2013
19
I just stumbled upon this thread because I too am looking for the accelerator software after misplacing it among the numerous other junk in my office. Regardless, the entitlement of you pricks is priceless. Its no ones fault but URC for making their software easy enough for a 3rd grader to use.

You all are acting like because you install fences for a living that no one else should be able to watch a youtube video and install their own god damn fence. How about you be good at your job and sell your experience instead of trolling the forums 24 hours a day? Maybe than you would make an honest living.
Post 97 made on Tuesday April 28, 2015 at 19:06
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,173
On April 28, 2015 at 18:57, azag said...
I just stumbled upon this thread because I too am looking for the accelerator software after misplacing it among the numerous other junk in my office. Regardless, the entitlement of you pricks is priceless. Its no ones fault but URC for making their software easy enough for a 3rd grader to use.

You all are acting like because you install fences for a living that no one else should be able to watch a youtube video and install their own god damn fence. How about you be good at your job and sell your experience instead of trolling the forums 24 hours a day? Maybe than you would make an honest living.

How about a big fat F u buddy!!! You are asking for software that you are not entitled to NOR allowed to own. Will see if we can figure out who your dealer was because if he gave you the software, he just lost the line. You don't even know what the hell you have. You have an MRX10 and a MX780. The two don't work with one another you jackass. You are not even smart enough to learn what products you have, what works with what, and which software works with which products but have the nerve to come here and call us names. Go take a long jump off a short cliff.
Post 98 made on Tuesday April 28, 2015 at 19:11
azag
Junior Member
Joined:
Posts:
June 2013
19
I have 2 trc780s Smart guy. Perhaps I struck a nerve. Nonetheless I will get the software again whether its given to me or purchased. Your pointless ranting about your income will not deter me.
Post 99 made on Tuesday April 28, 2015 at 19:12
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,173
On April 28, 2015 at 19:11, azag said...
I have 2 trc780s Smart guy. Perhaps I struck a nerve. Nonetheless I will get the software again whether its given to me or purchased. Your pointless ranting about your income will not deter me.

No, but URC's lawyers may
Post 100 made on Tuesday April 28, 2015 at 19:14
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,173
On April 28, 2015 at 19:11, azag said...
I have 2 trc780s Smart guy. Perhaps I struck a nerve. Nonetheless I will get the software again whether its given to me or purchased. Your pointless ranting about your income will not deter me.

On April 28, 2015 at 16:13, azag said...
I currently have the following urc products working pretty well.

mrx-10
2x mx-780
thz-100
12 mixed dimmers and switches

I am looking to purchase a second controller for the master bedroom to utilize the second remote. The dealer/installer I was using stopped responding to my emails and I can no longer locate my ccp accelerator software.

Do I need another mrx-10 or would the mrx-2 be ok in this situation? I would also be interested in purchase a few more lighting modules and possibly another copy of the accelerator sofware. I do enjoy programming myself.
Post 101 made on Tuesday April 28, 2015 at 19:14
azag
Junior Member
Joined:
Posts:
June 2013
19
Good job you can copy and paste!
Post 102 made on Tuesday April 28, 2015 at 19:31
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
7,173
On April 28, 2015 at 19:14, azag said...
Good job you can copy and paste!

I forgot to ask, what kind of engineer are you?
Post 103 made on Tuesday April 28, 2015 at 21:52
azag
Junior Member
Joined:
Posts:
June 2013
19
My background really shouldn't have any merit on the topic. I understand you guys are trying to make a living. It shouldn't be dependent on the software. It should be your expertise with the product, your knowledge of the software and your ability to create custom macros that keeps your clients returning. If URC really wanted to restrict the software they should have setup the software with 443 logins or usb keys.

Anyway, I'm a Network and Systems Engineer.

CCIE, CISSP, VCDx to name a few certs.
Post 104 made on Tuesday April 28, 2015 at 22:10
kgossen
Super Member
Joined:
Posts:
March 2008
2,853
On April 28, 2015 at 21:52, azag said...
My background really shouldn't have any merit on the topic. I understand you guys are trying to make a living. It shouldn't be dependent on the software. It should be your expertise with the product, your knowledge of the software and your ability to create custom macros that keeps your clients returning. If URC really wanted to restrict the software they should have setup the software with 443 logins or usb keys.

It IS dependent on our knowledge and expertise of the product. I couldn't give a crap about who has the software. I have seen many DIY's "3 year old" programs though. My favorites are from the engineers that have a program so bloated with actions and they're always the only person in the house that can actually use it!!

Anyway, I'm a Network and Systems Engineer.

CCIE, CISSP, VCDx to name a few certs.

I love how you just added a "few" of your certs.

The old saying is so true.... How do you know the engineer in the room? They'll make sure to tell you.
"Quality isn't expensive, it's Priceless!"
Post 105 made on Wednesday April 29, 2015 at 11:23
azag
Junior Member
Joined:
Posts:
June 2013
19
I was asked about my background. And again it has no merit on a program that anyone can pickup and use in under 15 minutes.

Don't be pissed at me that what you chose to do for a living is my hobby.

Last edited by azag on April 29, 2015 11:51.
Find in this thread:
Page 7 of 8


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse