Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Low-cost day/night light sensors - use with MSC-400
This thread has 1 response. Displaying all posts.
Post 1 made on Friday June 8, 2012 at 19:58
TwistedMelon
Long Time Member
Joined:
Posts:
December 2004
435
A couple of years ago I posted looking for information on light sensors that could be effectively used with the MSC-400, with the voltage sensing accessory as an intermediary connection. While the discussion was fruitful on other subjects, nothing was ever recommended for light sensing.

I've been meaning to post back for a while with some links to suitable products, so here goes. When searching the web it all comes down to the selection of terms.

A quick search on eBay for "dusk switch" seems to bring back some nice products that would readily connect to the MSC-400 using its own 12v output and the voltage sensing accessory.

Here are a couple, though these links will disappear eventually.

$13 shipped: [Link: ebay.com]

$37 shipped panel-mount style: [Link: ebay.com]

These come with bare wires. There's also the Xantech SMLIT01 which is generally used for monitoring LED or other equipment light but should also work for ambient or outside light level if you stick the sensor on a window facing out. The stereo mini plug will have to be cut or a connector to bare wire supplied to then connect it back to the MSC-400's 12v supply and voltage sensor.
https://TwistedMelon.com - Mira & Manta IR - Remote Control Your Apps
Post 2 made on Friday June 8, 2012 at 23:42
gopronto
Senior Member
Joined:
Posts:
April 2008
1,439
the best night day sensor i ever found was also the cheapest...

I used one of those garden LED lights, the ones with the small solar cells on the top, take the whole thing apart so your just left with the solar cell part.

now if your controll/automation system can that a analouge voltage in, then you can trigger on a voltage, if not then all you have to do is use a low voltage relay and use the voltage to activate the relay.

I have had one off these sensors on my roof in New zealand and its still going, i have purchased nightday sensors from europe and the USA and non have lasted longer than 1 year.

Enjoy :)
Pronto still one of the best Wi-Fi Remotes,
www.ikonavs.co.nz and [Link: prontoprojects.com] Axium Control catching up fast :)

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse