Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Commands and Macros work in MX850 but not TX-1000
This thread has 3 replies. Displaying all posts.
Post 1 made on Thursday April 26, 2012 at 04:31
kdp99
Long Time Member
Joined:
Posts:
April 2004
143
Hi Folks,

Any bright ideas on the following, I've emailed URC but not had a reply.

I have used several URC remotes (850,950 and 3000) for years with great success. I've now tried a TX-1000 and hit 2 brick walls.

I have copied a hex IR command (its a learned command for a 5 way HDMI switch I got from eBay) onto a button on the TX-1000, the command is sent by the TX-1000 but the device does not respond. With the same command pasted into the MX-850 the device does?

I've pasted the Hex at the bottom of the post. I've used brand new '100%' power batteries and kept close to the device to make sure its not a power/range issue.


The second involves a built in database command (TV 080 power), it works fine in both remotes as a simple button, but when I put it into a macro, again both remotes send a signal but the TV only responds to the MX-850 and not the TX-1000. I've tried the usual tricks (increased the repeat rate, putting the command into the macro multiple times, even edited the hex to change the burst number from 50 to 100).


Seems like a bugs to me, thanks in advance for any help.

Keith

The Hex IR

0000 006E 0024 0002 00C4 013A 0014 0017 0014 0017 0014 0017 0014 0017 0014 0017 0014 0017 0014 0017 0014 0041 0014 0041 0014 0041 0014 0041 0014 0041 0014 0041 0014 0041 0014 0041 0014 0017 0014 0017 0014 0041 0014 0017 0014 0017 0014 0017 0014 0017 0014 0017 0014 0017 0014 0041 0014 0017 0014 0041 0014 0041 0014 0041 0014 0041 0014 0041 0014 0041 0014 05E6 0055 0155 0115 0D35 0055 0155 0115 0D35
Post 2 made on Thursday April 26, 2012 at 07:15
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,470
Did you check the torrents for a fix? I could take a guess as to why you have gotten no response from URC.
Post 3 made on Thursday April 26, 2012 at 08:22
Duct Tape
Loyal Member
Joined:
Posts:
November 2008
5,295
Seems more like justice to me, and not so much a bug.
[Link: facebook.com]
Post 4 made on Thursday April 26, 2012 at 08:57
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
Karma's a bitch!
"Quality isn't expensive, it's Priceless!"


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse