On March 30, 2012 at 09:27, Duct Tape said...
I cut and splice the cables. How good are your soldering skills? The wires aren't extremely thin and are pretty easy to solder to cat5.
White = Tx (Pin 3)
Red = Rx (Pin 2) *even though the unit does not do 2 way so this connection is useless*
shield = Gnd (Pin 5)
I have also just made up my own long serial cable extensions using solder on DB9 ends.
Where do you source your cables from?
Do you just take
MS-01 and cut it in half?