Post 1 made on Wednesday February 22, 2012 at 18:37 |
remotenote Lurking Member |
Joined: Posts: | February 2012 1 |
|
|
Looking to buy the Serena Shades with RF remote control, the little Pico one. Could a URC remote 'learn' the RF codes of these? If they can learn the codes, could you have a macro that would enable more than one favorite position? (I picture it as a simple press and hold command for like 3 seconds or whatever you want.) Thie idea being that I could go to a Shades screen and select the top button for late afternoon, the next button down as the sun goes lower, the third button for 3/4 down, and finally a Close command on the bottom.
I realize that the Pro-line of the Lutron is the 'right' way to do this but I sure like the price point of the Serena line, and they still have the QED motors and talk to each other just like their fancy expensive cousins.
Thanks for any help/ideas you can offer.
(IR isn't an option as we will have a valence blocking the shade headrail, plus I don't want to put a hole in the wall to run a wire for IR repeaters.)
|
|
Post 2 made on Wednesday February 22, 2012 at 19:18 |
PeterN Active Member |
Joined: Posts: | July 2008 546 |
|
|
You aren't going to be able to learn RF codes into a URC remote or any IR learning remote.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.