| Post 1 made on Wednesday January 25, 2012 at 11:30 |
campuresti Lurking Member |
Joined:
Posts: | January 2012
1 |
|
|
I programmed a MX880 with a mrf260 via CCP. I am getting a lot of interference in the closet and don't know how to fix. I have been programming URC for 6 years and have never had a problem like this. I have replaced the rf 2 times already. I have moved the rf from the closet to the floor to tha attic and nothing seems to work. It's a very simple system only consisting of a projector, Denon amp, uverse cable box and PS3. Any one have suggestions on how to fix?
|
|
| Post 2 made on Wednesday January 25, 2012 at 13:27 |
Tom Ciaramitaro Loyal Member |
Joined:
Posts: | May 2002
7,965 |
|
|
Start mrf at id 0.
Move to location that shows no interference on rf led.
Change I'd back to where you had it. Don't leave on zero.
|
There is no truth anymore. Only assertions. The internet world has no interest in truth, only vindication for preconceived assumptions. |
|
| Post 3 made on Wednesday January 25, 2012 at 21:24 |
fonzanoon Active Member |
Joined:
Posts: | March 2007
646 |
|
|
change the 260 to a mrf350 and your problems will vanish
|
Cedia Certified King of the Ring |
|
| Post 4 made on Thursday January 26, 2012 at 18:11 |
JoeFlabitz Select Member |
Joined:
Posts: | December 2008
1,517 |
|
|
You can try removing the MRF260 antenna. Reduced range and reduced RF interference.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
