Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Volume controls for the MX3000
This thread has 6 replies. Displaying all posts.
Post 1 made on Thursday January 12, 2012 at 06:41
banty007
Long Time Member
Joined:
Posts:
January 2012
24
Hi All,

I am trying to control the audio level up and down on a Sanyo PLC-XU106 using the hard buttons on the MX3000. I have added the strings and they work only by continually pressing the button to raise or lower the volume. Is there any way to set this to press and hold? I have ticked the "Repeat while button is pressed" box but still no joy......
Post 2 made on Thursday January 12, 2012 at 09:47
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
When using RS-232 you have to adjust the Ramp Speed in CCP
"Quality isn't expensive, it's Priceless!"
OP | Post 3 made on Thursday January 12, 2012 at 10:04
banty007
Long Time Member
Joined:
Posts:
January 2012
24
On January 12, 2012 at 09:47, kgossen said...
When using RS-232 you have to adjust the Ramp Speed in CCP

Hi thanks for the response. I am not using CCP because I am using because I am using MX3000 and a MSC400i.
Post 4 made on Thursday January 12, 2012 at 14:29
kgossen
Super Member
Joined:
Posts:
March 2008
3,026
Then Ramp speed in the stand alone editor for the MSC
"Quality isn't expensive, it's Priceless!"
OP | Post 5 made on Friday January 13, 2012 at 07:21
banty007
Long Time Member
Joined:
Posts:
January 2012
24
On January 12, 2012 at 14:29, kgossen said...
Then Ramp speed in the stand alone editor for the MSC

Where do I find this setting?
Post 6 made on Friday January 13, 2012 at 18:05
KCThirstyEar
Active Member
Joined:
Posts:
January 2003
551
Double-click the individual code you want to change to bring up the repeat/ramp options.
KC
Audio Artisans
OP | Post 7 made on Monday January 16, 2012 at 11:01
banty007
Long Time Member
Joined:
Posts:
January 2012
24
On January 13, 2012 at 18:05, KCThirstyEar said...
Double-click the individual code you want to change to bring up the repeat/ramp options.

Thanks dude!


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse