Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Device code help with mx-450
This thread has 5 replies. Displaying all posts.
Post 1 made on Tuesday December 6, 2011 at 14:24
bobsyouruncle
Lurking Member
Joined:
Posts:
December 2011
5
I am new to the mx-450 and I am working my way through its functions. I have used the archiver and updated the firmware and database. I have the following equipment setup:

Panasonic 65" Plasma 3D GT30
Blu-ray 3D Panasonic DMPBDT110
Cox cable DVR/Cable box
Denon 1912
Apple TV
xbox 360


I have it basically working however if anyone has the best code set to start with for the devices above that would be great. As an example I am using 0110 for the cable box and that is good. I ran through the device setup using the power off method but their are multiple codes that power off the units and wanted to make sure I have the best one to start with.
The device for the Denon 1912 would help. Cannot seem to select zone 2 as an example.
Thank you in advance!
Dan
Post 2 made on Wednesday December 7, 2011 at 17:12
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,470
Dan,

The codesets for your devices are listed below. I have not tried the Cox cable codes as they are not local here. The rest I have used and should work fine. Post back if something doesn't work.

Panasonic Discreet codeset is 377. This does not have volume codes, but I am guessing you will not be using TV volume with your setup

Panasonic BD codeset 346

Cox Cable box codeset 043

Denon codeset 1319 for all the main functions
Denon codeset 1320 for zone 2 functions

AppleTV codeset 476

Xbox360 codeset 408
OP | Post 3 made on Thursday December 8, 2011 at 12:36
bobsyouruncle
Lurking Member
Joined:
Posts:
December 2011
5
I cant thank you enough!. I will try these when I get home tonight.

Thanks again,
Dan
Post 4 made on Thursday December 8, 2011 at 20:40
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,470
On December 8, 2011 at 12:36, bobsyouruncle said...
I cant thank you enough!. I will try these when I get home tonight.

Thanks again,
Dan

It's no trouble. Let me know if they all work after you try them out.
OP | Post 5 made on Friday December 9, 2011 at 14:00
bobsyouruncle
Lurking Member
Joined:
Posts:
December 2011
5
Hi Again,
The panasonic TV code , the menu button no longer worked so I went back to the code set I was using prior. I have to test the rest , I will also post the code sets I am currently using.

Thanks again,
Dan
Post 6 made on Friday December 9, 2011 at 16:27
goldenzrule
Loyal Member
Joined:
Posts:
July 2007
8,470
On December 9, 2011 at 14:00, bobsyouruncle said...
Hi Again,
The panasonic TV code , the menu button no longer worked so I went back to the code set I was using prior. I have to test the rest , I will also post the code sets I am currently using.

Thanks again,
Dan

Yeah, the Panasonic codeset I gave you is for discreet codes. If you want some other functions that do not require discreets, such as menu or the arrow keys, your best bet is to simply learn those codes from the manufacturers remote. You may end up with a somewhat confusing setup if you add too many devices. This way you will have all your TV's codes in one device with the discreet codes as well as the menu and directional buttons codes as well.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse