Post 1 made on Wednesday October 19, 2011 at 22:55 |
I have almost finished programming an extensive audio / video system and am trying to program the remote for Lutron lights. I have the layout on the remote,have a phantom RF base, have set the four digit code on the URC lighting page and downloaded everything into the remote. I can't get the remote to talk to the Lutron switch. I have pressed the center of the switch and everything is flashing like it should. It seems that the remote is not sending out an RF code, even though there are codes shown on the simulator and Macro page. I have noticed that there is no outgoing signal indicator on the Lighting page and no battery level indicator either on that page. I am sure it's something simple but I am at a loss. Ideas anyone?
|
|
Post 2 made on Thursday October 20, 2011 at 10:18 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
Is it a URC Lutron switch or just a Lutron switch?
|
"Quality isn't expensive, it's Priceless!" |
|
Post 3 made on Thursday October 20, 2011 at 11:41 |
Total Control Remotes Super Member |
Joined: Posts: | July 2006 2,987 |
|
|
Erase all addresses and start over. You might have a botched up stored sequence in there that cannot be over-written with a correct one until you erase it.
|
|
OP | Post 4 made on Thursday October 20, 2011 at 13:41 |
I tryed that and everything looks ok. Could the supplier have sent me non URC lutron dimmers? MRF2- 600M-? say it isn't so!
|
|
Post 5 made on Friday October 21, 2011 at 09:07 |
Bubby Advanced Member |
Joined: Posts: | July 2007 942 |
|
|
Yes. That is a run-of-the-mill Lutron RF dimmer. You need to get the URC ones from URC dealer.
|
|
OP | Post 6 made on Saturday October 22, 2011 at 00:51 |
DOE!!! Thanks. I think it's supposed to be an MRFA urc or something.
|
|
Post 7 made on Saturday October 22, 2011 at 08:58 |
Bubby Advanced Member |
Joined: Posts: | July 2007 942 |
|
|
MRFA-600M-URC-WH
600 watt dimmer in white
|
|
OP | Post 8 made on Saturday October 22, 2011 at 09:15 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.