Let me start by first saying I have been programming MX900's for years love the product, durable, reliable cant say enough good things. I just programmed my first 880 and had a few glitches. The 1st was the doubling of commands on a DTV rec. Seems that if the customer held down any button on that page it would repeat. I looked all over the place to find a sustain defeat option but could not find it (if there is one). Is this most likely a bad code set or is there something in the software that im missing. 2nd, in my all off macro the yamaha a/v rec will only turn off line of site, meaning it is not passing through MRF350. The rest of the macro seems to run just fine RF, just the one command to turn off the rec is IR only. This one really stumped me. Any help on these q's would rock.

Josh

Click on the button on the remote, then look in the Macro window. Dbl click the IR Code int he macro window. Uncheck, Repeat while press, and change repeats to 1.


DBL click remote in house designer, then click on RF Control make sure the AVR is set to RF, and the Base station is set as well.

On the first one I did try that, when I hit apply or ok to confirm the change it just reverted back to the sustained command. Maybe the program just needed to be restarted.

As for the RF control I knew I was missing something. I added the AVR codeset after I did the RF stuff. Thanks for all the help.

Josh