Hi tehre Guys,
I was wondeing if you could help me put I have the mx 3000 that I was programming and so far everthing is cool I am getting teh hang of it but my problem is that my pioneer reciever had Xm integrated in it, unfortunately it seems that I cannot cchge the channels of xm from my remote I was wondering if any of you would have any suggestions. Thanks in advance
Mickey

Can you change the channels from the receiver's original remote?

If so, have you tried learning those codes into the MX-3000, saved the file, and then downloaded it to the remote?

We need more information on what you've done to try and get the XM channel changing to work, and possibly what buttons on your original remote are used to change the channels.

Do you need to be in a certain "mode" in the receiver to change the channels. Have you taught the MX-3000 to change to that mode first?

Hi there yes I have done all that the problem that I have is that I'm having is that I would like to add xm logos kind of like a favourite page then press for example The blend logo and voila the channel goes to The blend,
On my reciever remote I press Xm Then I have to press this button called the D.Access then input a three digit number that all works.
What I am doing on the mx 3000 is that I can get the channels to change no problem by programming d aceess then i number then d acess again then the number and that is all fine what I really would like to have is the bility to press the channel logo and it changes channel. I have the Pioneer elite VSX-82TSX and the codes that I am using are the Vsx 72.
Thanks in advance and I appreciate all the help by the way I am a newbie to this.
Mickey

All you need to do is make a macro up for each XM channel logo.

Isn't that what you've already done, and you say it works. So just assign the macro to the log button.

Or am I missing something?

Feel free to email me if you can't get this worked out and we'll put our findings here in the thread for others to see.

Greg