|
|
|
Complete Control by URC Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | MSC400 and NEC 42XR4 This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Sunday December 3, 2006 at 23:11 |
Kurt77++ Long Time Member |
Joined: Posts: | January 2005 256 |
|
|
I have a MSC400 and NEC 42XR4 Plasma which i want to control with RS232 But i cant seem to get it to work, I got the RS232 Codes from the Manual which read
Off - 9F 80 60 4F 00 CE
when entered it comes out like this
9F, 80, 60, 4F, 0, CE
I have tried with and Without a Carridge Return
but i get no response from the Panel.
Any Suggestions?
|
|
Post 2 made on Tuesday December 5, 2006 at 20:33 |
KCThirstyEar Active Member |
Joined: Posts: | January 2003 551 |
|
|
If CE is your checksum, my calculations come up with 1CE for that, not CE. Also is your Baud, Length, Parity and SB set in the 400? Should be 9600, 8, Odd, 1. You may need to check pin-outs on your Plasma RS232 as well.
|
KC Audio Artisans |
|
Post 3 made on Tuesday December 5, 2006 at 20:56 |
KCThirstyEar Active Member |
Joined: Posts: | January 2003 551 |
|
|
Lower order 8 bits...CE should be correct. Sorry. But I'd check your Parity. I'd guess it's not set to Odd.
|
KC Audio Artisans |
|
OP | Post 4 made on Tuesday December 5, 2006 at 23:47 |
Kurt77++ Long Time Member |
Joined: Posts: | January 2005 256 |
|
|
Yeah i checked all the settings and the Parity is set to Odd.
|
|
Post 5 made on Wednesday December 6, 2006 at 11:10 |
KCThirstyEar Active Member |
Joined: Posts: | January 2003 551 |
|
|
Your code looks correct based on the documentation. No Carrige return should be required. Do you know what the pin assignments on the actual plasma are?
|
KC Audio Artisans |
|
OP | Post 6 made on Wednesday December 6, 2006 at 14:55 |
Kurt77++ Long Time Member |
Joined: Posts: | January 2005 256 |
|
|
Yes i have the pin config and that all seems to be correct as well, Urc Tech support have offered some advice, so i will try that later on
|
|
Post 7 made on Wednesday December 6, 2006 at 18:00 |
KCThirstyEar Active Member |
Joined: Posts: | January 2003 551 |
|
|
If you get a solution, please post it, and share the knowledge.
|
KC Audio Artisans |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|