Post 1 made on Saturday October 25, 2008 at 10:57 |
wilk1 Long Time Member |
Joined: Posts: | November 2002 33 |
|
|
Hi,
Just picked up a blu-ray player. Unfortunately the IR codes conflict with my Panasonic S77 DVD player.
The BD30 has a setting to change the IR code set. Default is Set 1, but there is also Set 2 and Set 3. I have tried both sets 2 & 3 and the good news is they do not conflict wit the S77.
The bad news is that I can't seem to find codes in the URC MX900 IR database for either set 2 or 3. I have tried all 12 of the generic Panasonic DVD sets (Panasonic1 thru 12) but the BD30 has not responded to them. Interestingly, the s77 responded to about 8 of the sets.
Does anyone have or know where I can find discrete codes for the BD30's IR code set 2 or 3 please? I can learn the codes into my MX900 but I would not have discretes that way.
PS. prefer to keep the S77 in my setup as the DVD upscaling is better than the BD30s upscaling.
|
|
Post 2 made on Monday October 27, 2008 at 15:53 |
codster Long Time Member |
Joined: Posts: | November 2006 36 |
|
|
I used code 2 and learned Previouse track, Rew, FF and Next track.
Codster
|
|
Post 3 made on Sunday January 4, 2009 at 19:20 |
unadulterated Lurking Member |
Joined: Posts: | January 2009 1 |
|
|
I'm having the same problem. I ended up learning all of the code 2 codes from the remote. Of course there are no discrete on/off buttons on the remote so there's no way to learn those. Have you had any luck in obtaining the on/off codes?
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.